Vesta Smart Home Security Alarm System Installation Manual page 7

7
2
Unpack all the parts
B
PIR - Motion detectors
1 Pull out the plastic
pull tab on the back of
the PIR. This will
activate the batteries.
Wireless Keypad
1 Pull out the plastic
pull tab on the back of
the Keypad. This will
activate the batteries.
Remote—Fobs
Press Arm
Button for 1 sec
Learn/Testing
Button
1 x Screw
Press * & # together
For 1 sec Learn/Testing
Button
Installing / replacing Batteries in the Motion PIR.
Step 1. undo the screw at the button of the sensor.
Step 2. insert battery supplied (EL123)
Step 3. return the back and re –recrew cover.
Step 4. Press learning/Testing button to active Sensor. (red light
Flash)
Installing / replacing Batteries in the Keypad
Step 1. undo the screw at the button of the keypad
Step 2. insert AA battery EL123
Step 3. return the back and re –recrew cover.
Step 4. Press learn/Testing *& # button to active Keypad
Installing / replacing Batteries in the Remote Key fob
Step 1. Open Battery Compartment using coin by turning cover in the
direction of the big arrow
Step 2. insert battery
Step 3. return the back and re –screw cover.
Step 4. Press Arm Button to activate
5
7