Initial Setup Settings - Oilon CUBE Series Installation And Commissioning Manual

3. Select Users and roles.
5. Enter the password and tap OK.
● The Service level password is 8520.
7. Open the Initial setup menu.

4.3 Initial setup settings

During first start-up, the initial setup settings icon is
displayed in the top menu row.
The Initial setup settings menu contains the basic
settings required during the commissioning process.
Go through the settings during installation.
Once the settings are complete, hide the Initial
setup menu by tapping the option at the bottom of
the screen.
Device settings → Service → Initial setup
If the data hub is connected to the internet, the current time is retrieved automatically. If there is no
internet connection, set the time by hand.
Time zone
32 (54)
Controller time
The current time zone (UTC; 2 h in Finland).
4. Select Service.
6. You are now signed in as a service-level user.
Return from the menu by tapping the arrow in the
top left corner.
You can also access initial setup settings from the
Service settings.
Device settings → Service → Initial setup
You can choose to display this menu again anytime
from the Service menu by tapping Initial setup.
Device settings → Service → Initial setup
M8006 2123EN