Dimensions, Connections, And Components - Oilon CUBE Series Installation And Commissioning Manual

Floor drain
The unit's installation site must have a floor drain. The site's floor should be inclined so
that any runoff from the unit leads towards the drain.

2.2 Dimensions, connections, and components

CUBE
CUBE, EasyAce ver. 1
measurements in the image are in millimeters
H Domestic hot water from storage tank
C Cold domestic water to storage tank
WI Heating water inlet (return)
WO Heating water outlet (flow)
BI Brine circuit in
BO Brine circuit out
VA Bleed screw
TE266 Domestic hot water sensor
M8006 2123EN
22 mm steel pipe
28 mm copper pipe
1" inner thread and flat gasket
For bleeding the DHW coil
11 (54)