Commissioning; General; Signing In As A Service Level User - Oilon CUBE Series Installation And Commissioning Manual

4 Commissioning

4.1 General

The heat pump's automation system is operated with an app installed in a smartphone
or tablet. This app is used to connect to the heat pump's built-in data hub. The unit is
supplied with a wireless touch screen preinstalled with the app and with the connection
already configured.
Switch on the wireless touch screen and start the commissioning process. Once the
process is complete, hand the wireless touch screen over to the end customer.
1. Switch on the wireless touch screen by pressing
the power button.
Start the commissioning process by signing in to the service level. This will give you
access to the necessary settings.

4.2 Signing in as a service level user

To gain access to all settings, sign in as a service-level user.
1. Open the main menu from the top left corner or
by swiping right from the left edge of the screen.
M8006 2123EN
2. Start the EasyAce app.
2. From the menu, select App settings.
31 (54)