This product information states specific information on the modules. It is only valid in combination with the enclosed product information Modules of the series AMI in front-door stations. TCS TürControlSysteme AG, TCS Hotline Deutschland: hotline@tcsag.de Subject to technical changes. www.tcsag.de...
Delete the programming ....................9 Label the nameplate ......................10 Open and close the module – the win:clip system ..........10 Accessory ......................... 11 Service ..........................12 TCS TürControlSysteme AG, TCS Hotline Deutschland: hotline@tcsag.de Subject to technical changes. www.tcsag.de PI_AMI1090x-uk 1A...
They are suitable to carry name tags and as push button (e.g. to trigger door calls). They can be used only in combination with a display module AMI1010x, a built-in door ® loudspeaker module AMI11100 or a codelock module AMI11200 (TCS:BUS connection necessary)! Short description ...
Set all AS addresses to the same value and block the addresses. TCS TürControlSysteme AG, TCS Hotline Deutschland: hotline@tcsag.de Subject to technical changes. www.tcsag.de PI_AMI1090x-uk 1A...
1 assign a bell button with door call to serial number 2 adjust the allocated AS address set and reset the programming lock send a control function TCS TürControlSysteme AG, TCS Hotline Deutschland: hotline@tcsag.de Subject to technical changes. www.tcsag.de PI_AMI1090x-uk...
Manual programming of a bell button ® Ensure that the indoor station at the TCS:BUS is connected and the mains voltage is switched on (the LED at the power supply and control unit is on).
Note: A repeated programming of an already programmed bell button changes only the second serial number. TCS TürControlSysteme AG, TCS Hotline Deutschland: hotline@tcsag.de Subject to technical changes. www.tcsag.de PI_AMI1090x-uk...
Page 8
1) If there sounds a Progsperr tone instead, a programming lock at the front-door station is activated. The programming lock can only be deactivated with a Service Device TCSK-01 or the configuration software configo TCS TürControlSysteme AG, TCS Hotline Deutschland: hotline@tcsag.de Subject to technical changes. www.tcsag.de...
1) If there sounds an Progsperr tone instead, the programming lock of the front-door station is activated. The programming lock can only be deactivated with the Service Device TCSK-01 or the configuration software configo TCS TürControlSysteme AG, TCS Hotline Deutschland: hotline@tcsag.de Subject to technical changes. www.tcsag.de...
3. Push the cutted tag from the side into the pocket of the nameplate glass. * You can order the foil directly at TCS: Polyester foil which can be labeled for nameplates DIN A4. Open and close the module – the win:clip...
01/2013 Accessory Short text Article number Maintenance package FBI1210-0 Laser film foil matt, A5 format 0031123 TCS TürControlSysteme AG, TCS Hotline Deutschland: hotline@tcsag.de Subject to technical changes. www.tcsag.de PI_AMI1090x-uk...
Need help?
Do you have a question about the AMI1090 Series and is the answer not in the manual?
Questions and answers