Replacing And Mounting The Reflectors - Shimano DEORE XT PD-M8040 Dealer's Manual

MAINTENANCE

Replacing and mounting the reflectors

„ Replacing and mounting the reflectors
PD-MX80/PD-GR500
PD-M828
(B)
(A)
A special reflector set SM-PD64 is
available. Mount reflectors with pins.
(A)
(B)
A special reflector set SM-PD64A is
available. Mount reflectors with reflector
fixing bolts.
17
(A)
Pin
(B)
Reflector
Tightening torque
2 - 2.5 N·m
NOTICE
•
When using the product without a
reflector, adjust the protrusion of pins
using attached spacers.
For details, refer to "Adjusting the gripping
force".
•
When installing the reflectors to PD-GR500,
use the spacer (0.65 mm). When installing
the reflectors to PD-MX80, the spacer is
unnecessary.
(A)
Reflector fixing bolt
(B)
Reflector
Tightening torque
1 - 1.5 N·m