Installing/Removing The Reflectors; Pd-Ef102/Pd-Ef202/Pd-Ef205 - Shimano PD-EF102 Dealer's Manual

Maintenance

Installing/removing the reflectors

10.
With lock nut B locked, tighten the lock nut A.
NOTICE
• Both lock nut A and lock nut B are threaded right-hand for the left pedal and
threaded left-hand for the right pedal.
• Adjust lock nut B so as to achieve a smooth rotation without excess play when
the axle unit is set into the pedal.
Installing/removing the reflectors

PD-EF102/PD-EF202/PD-EF205

1.
Install the reflector as shown in the figure.
(1) Remove using a cross head screwdriver.
Lock nut B
5 - 7 N·m
Lock nut A
14