Mounting The Pedals On The Crank Arms - Shimano DEORE XT PD-M8040 Dealer's Manual

INSTALLATION

Mounting the pedals on the crank arms

INSTALLATION
„ Mounting the pedals on the crank arms
1
Apply a small amount of grease to the thread to prevent sticking.
PD-MX80/PD-GR500
(A)
PD-M8040/PD-M828
2
(B)
3
Remove any roughness or burrs on the joint, if detected.
Use a 15 mm spanner or 8 mm hexagon
wrench to mount the pedals on the
crank arms.
• The right pedal has a right-hand
thread; the left pedal has a left-hand
thread.
8
(A)
15 mm spanner
(B)
8 mm hexagon wrench
Tightening torque
35 - 55 N·m
NOTICE
PD-MX80/PD-GR500
Pay attention to the R/L mark.
R: right pedal
L: left pedal
PD-M8040/PD-M828
Pay attention to the difference between the
left and right pedals.
Right pedal Left pedal
No notch in end of Notch in end of
screw stem screw stem