Selecting A Call Tone; Sending A Call Tone - Audiovox FR314B Owner's Manual

Selecting a Call Tone

The FR-314 has seven built - in call tones. To select a call tone,
press the function button twice or until the LCD displays "
current call tone number will flash on the right of the display. Pressing
the up or down buttons will select between the seven available
signals. Each signal will be played by the speaker or headset as it is
selected. Once a signal is chosen, the FR-314 will return to standby
state if no buttons are pressed for 5 seconds, or if the call or PTT
buttons are pressed.

Sending a Call Tone

To Transmit the chosen signal, simply press the call button while
holding the PTT button. The chosen call signal will be played by the
speaker or headset and transmitted on the current channel, the call
icon will display on the LCD whenever a call signal is sent.
Call
Tone
Icon
ÿ
ÿ
" the
x
Call
Tone
Number