GenTent 20K Manual page 4

OPTION 2: REPLACE HANDLES WITH FOLDING HANDLES
We have an optional folding handle kit that is a bolt in replacement to the fixed handles provided with your generator.
These handles can be ordered with the GenTent 20k or ordered separately at www.gentent.com/products/mpaccflhdl.
This kit includes longer folding handles and installation hardware.
To install these handles, remove the fixed handles from the generator. There are four bolts that hold the handle in
place. Install the folding handles in the handle frame holes at the top and tighten. The universal handles accommodate
frame diameters from 1" to 1.5". The Generac frame is 1" diameter in this area. Be sure to tighten the handles until the
handle flanges press against the frame.
Copyright 2016, GenTent® Safety Canopies, LLC. All rights reserved. Nottingham, NH, USA. www.gentent.com V4