Page 1
THANK YOU Congratulations on your purchase of the GenTent™, the first ever wet weather safety canopy specifically engineered for portable generators. We are proud to provide this high quality, Made in the USA product and be a participant in the renaissance of USA Manufacturing.
NOTE Should GenTent cover block pull starter, it is advisable to release the elastic straps on the pull starter side and temporarily move GenTent canopy out of the way.
GenTent, or rips, tears or breaks due to sharp and/or heavy and/or falling objects. This warranty does not cover issues arising as a result of modifications made to your portable generator or to the GenTent™...
***Note: In some cases adaptation of the portable generator frame is required to create a proper mounting point for the GenTent clamps. Should your kit include a frame extender or frame adapter package (GTX, GTU, GTR, GTH), please follow the instructions for installation of the frame extender(s) or frame adapter(s) prior to installing the GenTent.
1) Determine whether the Rubber Sleeve and/or Rubber Pads are required Your GenTent Clamp kit includes 4 rubber sleeve adapters and 8 sticky backed rubber pads. Depending on the diameter, you will use one or both of these with your clamps.
Slide GenTent canopy over the frame so that all four corners are generally equal and level (fig. 6-A). Center GenTent canopy such that Vent Rod is centered under the top cap (fig. 6- Fig. 6-A (GenTent 10k and GenTent 20k)
GenTent now ships with the StormBracer™ door. This door wraps around the adjacent sides of the GenTent much like the skirts, forming a brace against storms. Each time you close the door, it must be pressed firmly back in place. If this is not done, holes may exist between the pieces of Velcro®...
GTACCB1U00 – Universal Frame Extender, injection molded, for use with square tube frames and round tube frames that have panels or heat shields which block the GenTent clamp from directly connecting to the frame, or when a generator frame is small and...