Attaching High Pressure Hose Hook (See Fig. 4); Attaching Accessory Hook (See Fig. 4); Attaching The Spray Gun (See Fig. 5 & 6) - Ford FPWG2700H-J-EU Operating Manual

10 ATTACHING HIGH PRESSURE HOSE HOOK (SEE FIG. 4)

Align the hole of the high pressure hose hook to hole on the handle bar.
Install four self-tapping screws, until the screws are snug.


11 ATTACHING ACCESSORY HOOK (SEE FIG. 4)

Align the accessory hook with the holes.

Install two plastic rivets, until the plastic rivet is snug.

Press hard with your finger to lock the rivet.

Fig. 3
12 ATTACHING THE SPRAY GUN (SEE FIG. 5 & 6)
Screw the spray wand and the trigger handle together until they are secure.
Insert the inlet coupler of the spray hose into the threaded fitting on the high pressure spray gun
and thread the black nut on by turning clockwise until it is hand tight.
Fig. 5
Copyright © 2016
FPWG2700H-J-EU / FPWG3100H-J-EU
P a g e
Fig. 4
Fig. 6
| 11 www.fordpowerequipment.co.uk
EN