Pump Filter - Kernau KFWD 8656144 User Manual

PUMP FILTER

The pump filter system in your Washing Machine prolongs the life of the pump by preventing lint from
entering your machine. We recommend that you clean the pump filter every 2 months.
The pump filter is located behind the cover on the front-lower right corner.
To clean the pump filter:
• You may use the washing powder spade (*) supplied with your machine or
liquid detergent level plate to open the pump cover.
• Lodge the end of the powder spade or liquid detergent level plate in the opening
of the cover and gently press backwards. The cover will open.
• Before opening the filter cover, place a container under the filter cover to collect
any water left in the machine.
• Loosen the filter by turning anti-clockwise and remove by pulling. Wait for the
water to drain.
NOTE:
Depending on the amount of water inside the machine, you may have empty the water
collection container a few times.
• Remove any foreign materials from the filter with a soft brush.
• After cleaning, re-fit the filter by inserting it and turning clockwise.
• When closing the pump cover, ensure that the mountings inside the cover meet
the holes on the front panel side.
• Close the filter cover.
WARNING:
The water in the pump may be hot, wait till it is cooled down carrying out any cleaning
or maintenance.
(*) Specifications may vary depending on the machine purchased.
EN
75