Table of Contents
Advertisement
All installations and services must be performed by qualified service personnel.
Fig. 4: Burner insertion illustration (Top view)
When mounting the burner, the mounting plate (Fig. 3) must be removed to provide access to the
area in front of the combustion chamber. A fiber insulating sleeve or amulet is provided on the
burner tube of
specific Thermo Pride burners.(see Fig. 4). See Thermo Pride burner application chart for type of
insulator. Do not allow the burner tube or end cone to physically touch or protrude into the
chamber, as excess heat transfer could result in destruction of the tube, end cone or both. The
burner tube/end cone is properly positioned, when the end is ¼ inch back from the inside surface
of the combustion chamber wall.
DO NOT CHANGE POSITION OF THE CHAMBER!
8
Advertisement
Table of Contents
