Mounting Rear Surround Speakers; Turning On The Unit And Tv; Power Cord Connection - Audiovox DV1201 Owner's Manual

Mounting rear surround speakers

1) Mark the correct mounting position on the wall.
2) Insert a fixing screw(s) at the marked position on the wall.
3) Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked.
Please call Customer Service at 1-800-252-6123
or visit online help at http://www.18002526123.com

Turning on the Unit and TV

1)Press the STANDBY/ON button to turn the Unit ON, or
2)Press the STANDBY/ON button on the remote control or the FUNCTION button or the
I /
the Unit while the Unit is in standby mode.
3)Turn on the TV by pressing its POWER button.
4)Select the channel on your TV corresponding to the VIDEO IN jack that the Unit is connected to. See TV User
guide for more information.
• If you have connected the Unit successfully, the DVD logo (start-up picture) will appear on your TV screen.
Notes :
• Whenever no disc or disc stop for 60 minutes, the system will be turned to POWER standby mode automatically.
• The LED of Standby will be turned on while the unit is at standby mode.

Power cord connection

• Make sure that all the components and speakers are connected correctly.
• To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
• Be sure the AC power cord is disconnected and all functions are off before making connections.
• When you are not going to use the Unit for a long period of time, disconnect the power cord.
E-10-16.pmd
Setup
Need More Help?
DO NOT RETURN THIS TO THE STORE
E - 14
14
PLAY Y button to turn on
4/24/2004, 12:24 PM