Setup; Power Connection; Connecting The Speakers & Subwoofer; Mounting The Rear Surround Speakers - Audiovox AVR2000 Instruction Manual

SETUP

Power Connection

Caution:
• Before you plug in the unit, make sure that the rated voltage of your unit matches your local voltage.
• Keep your hands dry when you are connecting the power cord to the wall outlet in case of electric shock.
• When you are not going to use the unit for a long period of time, disconnect the power cord.
Connecting the Speakers & Subwoofer
1. The speaker cords have been color-cord to simplify connection. Just plug the ends of each speaker wire
into the corresponding jacks on the rear of the unit, matching the color tube on the end of the speaker wire
to the color-cord connector. Make sure to connect the red (+) wire to the red (+) terminal on the rear of the
unit, and the black (-) wire to the black (-) terminal on the rear of the unit.
2. Connect each of the speaker wires to a satellite speaker. Make sure to connect the red (+) wire to the red (+)
terminal on the rear of the unit, and the black (-) wire to the black (-) terminal on the rear of the unit.
3. The subwoofer is the ONLY speaker which should be connected to the subwoofer jacks on the rear of the
unit. Connecting any other speaker to the subwoofer jacks may damage the unit.
Caution:
To prevent damage to the unit, be sure to turn off the unit before making any connection.

Mounting the Rear Surround Speakers

1. Mark the correct mounting position on the wall.
2. Insert a fixing screw(s) at the marked position on the wall.
3. Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked.
Need More Help?
DO NOT RETURN THIS TO THE STORE
Please call Customer Service at 1-800-252-6123
or visit online help at http://www.18002526123.com
4