SAFETY PRECAUTIONS The following marks and symbols are located on back of the unit. The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY PRECAUTIONS • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003.
The unit can play: DVDs [8cm/12cm disc] Audio CDs [8cm/12cm disc] Region Management Information Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs. If the region number printed on the DVD does not correspond to the region number of this unit, this unit cannot play that disc.
Please check and identify the included accessories. Remote Control ... x 1 AAA 1.5V Battery (for remote control) ... x 2 FM Wire Antenna ... x 1 AV Cable ... x 1 Quick Connect Guide ... x 1 Warranty Card ... x 1 REMOTE CONTROL Using the Remote Control •...
CONTROL REFERENCE GUIDE Remote Control FUNCTION Button Press to switch between DVD, AV IN, AUX and Radio. TUNING Buttons : Fast reverse playback. : Fast forward playback. TUNING : Scan all available radio stations. PREV Button Press to move backwards through titles, chapters or tracks on a disc.
CONTROL REFERENCE GUIDE Unit (Front Panel) TUNING/SKIP Control DVD Mode Press quickly to select the previous/next title, chapter or track on a disc; Press and hold for fast forward/reverse playback. RADIO Mode Press quickly to select preset radio stations. Press and hold to scan all available stations. 2) Remote Sensor Receives the remote control unit signals.
Display Information The DVD displays the information shown below on the TV screen and on the unit’s DVD display depending on the operation status. Display Examples TV Screen If no disc is loaded when the No Disc main unit powered on. Tray open Open Tray closed...
Connecting the FM Wire Antenna Connect the FM wire antenna to the FM antenna terminals. Fully unwind the wire antenna and position it for the best reception. A.Connecting your TV The unit can be connected to your TV in several different ways, depending on the design of your TV. RCA AUDIO/VIDEO JACKS Use the Audio/Video cable (supplied).
Press the SETUP button and select Video Out to P- Scan (see page 20). Attention: • Make sure your TV can support a progressive scan component video signal. Notes : • Connect the unit directly to your TV. If you connect the unit through a VCR, the playback picture will be distorted because DVDs are copy protected.
LISTENING TO ANOTHER AUDIO EQUIPMENT 1. Turn on the unit. 2. Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN function. Notes: • When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
Turning on the Unit and TV When the unit is plugged in, it is in standby mode and the standby indicator lights up. 1. Press the STANDBY/ON button to turn the unit on. 2. Turn on the TV by pressing its POWER button. 3.
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced in a manner that allows specific or limited operation during playback. Such as, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to the instruction notes of discs.
Angle Selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of current angles available.
SPECIAL FUNCTION Locating a Specific Title/Chapter/Time If a DVD contains title/chapter/time numbers, you can locate a specific title/chapter/time by directly selecting a title/chapter/time number. 1. Press the GOTO button to display Title. 2. Press the button to select the option (Title, Chapter or Time) then press the corresponding number button(s) for the Title/Chapter/Time you want.
REPEAT PLAYBACK You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) Repeating a Chapter You can play the same chapter repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the “ the screen.
DVD PROGRAMMABLE MEMORY DVD Programmed Playback You can combine your favorite titles/chapters and play them in the order you determine. 1. Press the MEMORY button on the remote control. 2. Use the button to select the title you want, then press the OK button on the remote control to confirm.
PLAY MODES FOR CD OR JPEG DISC When playing CD/JPEG discs, you can modify the Play Modes through the Toolkit which appears on the right side of the window. Press the windows and the button on the remote control to select files/tracks or play mode items. Then press the OK button.
CUSTOMIZING THE FUNCTION SETTINGS LANGUAGE OSD Language 1. Press the SETUP button. 2. Press the button to select OSD Language. 3. Press the button. Use the then press the OK button. The screen will change to your selected language immediately. 4.
Page 21
CUSTOMIZING THE FUNCTION SETTINGS Notes: • The displayable picture size is preset on the DVD. Therefore, the playback picture of some DVDs may not conform to the picture size you select. • When you play DVDs recorded in the 4:3 picture size only, the playback picture always appears in the 4:3 picture size regardless of the TV Shape setting.
CUSTOMIZING THE FUNCTION SETTINGS AUDIO Digital Output 1. Press the SETUP button. 2. Press the button to select Audio. 3. Press the button. Use the 4. Press the button. Use the PCM or Raw), then press the OK button. 5. Press the RETURN button to exit menu. PCM: Select when connected to a 2 channel digital stereo amplifier.
TROUBLE SHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Ensure the AC power cord is connected. No picture • The region number of the disc doesn't match the region number of this unit. • The TV is not set to receive DVD signal output. •...
Cleaning the Disc A defective or soiled disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. •...
Need help?
Do you have a question about the DV 7300 and is the answer not in the manual?
Questions and answers