Audio Setting; Digital Out; L/R Speaker - Audiovox DV1201 Owner's Manual

Customizing the Function Settings

AUDIO setting

Digital Out

1.Press the SETUP button.
2.Use or button to select Audio, press the ENTER button.
3.Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type.
4.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Raw : Does not have a Dolby Digital Decode.
PCM : Do have a Dolby Digital Decode.

L/R Speaker

1.Press the SETUP button.
2.Use or button to select the Audio, press the ENTER button.
3.Use or button to L/R Speaker, and then press the ENTER button.
4.Use or button to select the desired setting, and then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
L/R Speaker
Small : Small size of Speaker.
Large : Large size of Speaker (speaker diameter normally larger than 4 inch or 10 cm)
Note :
• You can adjust the channel balance on your Unit. Please see "ADJUSTING THE SOUND".
E-27-34.pmd
E - 30
30
(continued on next page)
4/26/2004, 10:32 AM