TCS-NET General Purpose Interface
1. Introduction
This manual describes how to use the setting tool software for the advanced conjunction function for the general
purpose interface. The setting tool allows writing, reading, and erasing air conditioning control data to respond to
input port changes for the general purpose I/F board (TCB-IFCG1TLE, referred to as GP hereinafter).
2. Overview of the System
This manual is intended for the setting tool for operations in conjunction with the GP.
Set the switches on the GP to SW5-5: OFF and SW5-6: ON, connect the connector CN5 on the GP to the RS232C
connector on the PC with the DYNA KIT cable, connect the power line of the GP, and then press the RESET button
(SW7) on the GP.
3. Necessary equipment and software
Product
DYNA KIT cable
.NET Framework
Writing tool software
PC
RS232C
Product name
Adapter CNV2-3.3V
Microsoft .NET Framework 2.0 or later
Setting tool software for advanced conjunction
function for the General Purpose Interface
Windows XP or 2000 with RS232C port
General Purpose I/F board (GP)
Obtain from
Carrier sales company
Download from Microsoft web site.
Carrier sales company
2
Setting Tool Manual
—