Toshiba TCS-NET Setting Tool Manual page 11

Setting Tool Manual
TCS-NET General Purpose Interface
6-4. Erase Operation
The set data of the selected patterns, which is stored in the GP can be erased with the Erase button.
The set data of other patterns in the GP is not erased when the set data of the selected patterns is erased.
The erase operation takes time in some cases.
6-4-1. Selecting Patterns
Click the checkboxes of patterns you want to select.
Two or more patterns are selectable.
Click the Toggle All button to select all patterns or cancel selection of all patterns.
If no pattern is selected, an error occurs.
6-4-2. Erasing Set Data
Click the Erase button after patterns are selected.
A confirmation message appears. Confirm the message and click the OK button to erase the set data.
To cancel the erase operation, click the Cancel button.
After the erasure is completed, a completion message appears and the windows of the selected patterns are
cleared.
11