Toshiba TCS-NET Setting Tool Manual page 10

Setting Tool Manual
TCS-NET General Purpose Interface
6-3. Read Operation
When the set data of the selected pattern is stored in the GP, the data can be read and displayed on the window.
During this read operation, only the data of the selected pattern is displayed and the display contents of other
patterns on the window are completely cleared.
The read operation takes time in some cases.
6-3-1. Selecting Patterns
Click the checkboxes of patterns you want to select.
Two or more patterns are selectable.
Click the Toggle All button to select all patterns or cancel selection of all patterns.
If no pattern is selected, an error occurs.
6-3-2. Reading Set Data
Click the Read button after patterns are selected.
A confirmation message appears. Confirm the message and click the OK button to read the set data.
To cancel the read operation, click the Cancel button.
After the reading is completed, a completion message appears and the read data is displayed on the window of
the selected pattern.
If there is no set data, a confirmation message appears indicating "no data."
10