Table of Contents
Advertisement
Maintenance Configuration
4.7.1
Backup and Restore
Backup & Restore allows users to import or export settings and restore the camera to its default settings.
•
Import & Export Settings: Import settings from a different camera, or export the current camera settings.
•
Default Settings: Restore the camera to its default settings. Check the box next to the settings that will
NOT be restored to default, or leave empty for a complete factory reset.
4.7.2
Reboot
Clicking the "Reboot" button will power cycle the camera. Please note the complete reboot process may take
up to five (5) minutes to complete.
Users can also setup a reboot schedule by enabling the "Timed Reboot" settings. If enabled, select the frequency
and time of day the camera will reboot automatically. Click "Save" to save all changes.
4.7.3
Upgrade
Use this page to upload new firmware and keep the camera up to date.
Click the "Browse" button to locate the firmware file on your PC and press the "Upgrade" button to start.
Once the upgrade is completed, the camera will reboot.
Caution! Do not close the browser or disconnect the camera from the network during the upgrade.
4.7.4
Operation Log
View and export the camera's operation log. Use the filters to view the report by type and start and end time.
Press "Search" to apply the filters and "Export" to export the report as a .txt file for your records.
-39-
Advertisement
Table of Contents
