Direct Drain - Hussmann microSC MDN-BA Installation & Operation Manual

P/N 9FQ-6-P110-075-00_B

DIRECT DRAIN

The evaporation system can be modified for a
direct floor drain .
● （Below is an example of MDN-4775A.）
① Disconnect the power cord.
② Remove 2 screws of the front panel, then the panel itself.
③ Remove 8 screws in the area shown by
Step 1
Unplug
④ Pull out the unit.
⑤
Remove 3 screws attached to the evaporation tray
(Marked with in the gure at right.)
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
in the gure.
Display Case
⑤
④
Unit
Evaporation tray
⑤
Open Vertical Merchandisers
4-3
Condensing Unit
Cassette