Bosch Professional GKT 18V-52 GC Original Instructions Manual page 21

plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Caution! When using the power tool with Bluetooth
u
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth in aircraft. Avoid using the product near
your body for extended periods.
®
The Bluetooth word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for making straight cuts in wood
with and against the grain and mitre cuts in wood while rest-
ing firmly against the workpiece. With the respective saw
blades, light building materials and plastics can also be
sawn.
The power tool must not be used to cut ferrous metals.
With the Bluetooth® Low Energy Module GCY 42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth® wire-
less technology.
Bosch Power Tools
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Lock-off button for on/off switch
(3) Lever for saw blade change
(4) Auxiliary handle (insulated gripping surface)
(5) Cover for GCY 42 Bluetooth® Low Energy Module
(6) Bluetooth® Low Energy Module GCY 42
(7) Cutting depth indicator
(8) Base plate
(9) Hex key
(10) Cutting depth scale
(11) Scale for mitre/bevel angles
(12) Parallel guide attachment, front
(13) Wing bolt for mitre/bevel angle preselection, front
(14) Button for mitre/bevel angle 47° and -1°
®
, a
(15) Protective guard
(16) Wing bolt for mitre/bevel angle preselection, rear
(17) Parallel guide attachment, rear
(18) Chip ejector
®
in the vicinity of
(19) Handle (insulated gripping surface)
(20) User interface
(21) Battery
(22) Battery release button
(23) Clamping bolt
(24) Clamping flange
(25) Circular saw blade
(26) Mounting flange
(27) Saw spindle
(28) Spindle lock button
(29) Pair of screw clamps
(30) Guide rail
(31) Connector
(32) 45° cut mark
(33) 0° cut mark
(34) Extraction hose
(35) Plunge markings (4x)
(36) Slider for preselecting the cutting depth
(37) Battery charge indicator (user interface)
(38) ECO mode indicator (user interface)
(39) Speed preselection button (user interface)
(40) Speed setting/mode indicator (user interface)
(41) Smartphone indicator (user interface)
(42) Power tool status indicator (user interface)
(43) Temperature indicator (user interface)
(44) Plastic insert for base plate
A)
A)
A)
A)
A)
A)
1 609 92A 4XT | (11.02.2020)
English | 21