Installation Instructions - Audiovox AMP-591A Owner's Manual

INSTALLATION INSTRUCTIONS

1. Select a mounting area where the amplifier will
have sufficient air circulation for proper cooling.
Inadequate air circulation will cause the temperature
of the amplifier to rise and will trigger the
thermal protection mode.
2. Place the amplifier on the mounting surface
and mark the locations of the four mounting
holes as shown in the illustration.
3. Remove the amplifier and drill a 1/8" hole at
each of the four locations.
CAUTION: Before drilling the holes, look at the
underside of the mounting surface. Always
check carefully to avoid drilling into wiring,
braces, fuel or brake lines. CHECK BEFORE
YOU DRILL !
4. Secure the amplifier to the mounting surface
using the self-tapping screws provided.
INSTALLATION DIAGRAM
SELF-TAPPINGSCREW
MOUNTINGSURFACE
-3-
SPLITWASHER
FLATWASHER
1/8"DIA.HOLE