Advertisement
3
SIDE MOUNTING WITH FOOT RAIL
2.1
3.4
2.4
3.5
2.2
2.3
3.6
TBRA016_REV_A00
11
12
7
8
9
10
Push Up To Open
Place the latch (item 13) into the rack,
lining up the mounting hole in the latch
with the nyloc nut inserted in diagram
2.3. Secure the latch in position using the
5MM
M8x20 Button head bolt and M8 flat washer
(items 11 and 12)
13
Fasten items 7,8,9 and 10 as shown.
4MM
10MM
Open the latch by pushing on the
latch release and slide the table into
position. Check that the table has no
forward/backward movement when the
latch is closed. If it does, loosen the nyloc
nuts (item 6) from diagram 3.1 and adjust
so that the table has no movement in the
slides when the latch is closed.
A small padlock can be used through the
hole in the latch release should you wish
to lock the table.
5
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
