Download Print this page
Front Runner PBDR001 Manual

Front Runner PBDR001 Manual

For ram 1500 (5th gen) 4 door crew cab 5.7' (2019-current) pro bed mounting system

Advertisement

Quick Links

front runner
START HERE!
Don't be a hero and muscle through this installation without reading these fitting instructions first! Improper installation of this gear may void certain
aspects of your warranty.
Before you begin, take a moment and open all your Front Runner Rack Kit boxes and gather the assembly instructions for the various components.
A complete kit will contain:
1. Front Runner Mounting System specific to your vehicle
2. Front Runner Rack Tray or Load Bar Slats
This document will guide you through the assembly of the Mounting System and assist you in fitting the Rack tray or Load Bars to your specific vehicle.
Please refer to the next page for a list of all the components, quantities and tools required.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
PBDR001_REV_A00
RAM 1500 (5th Gen) 4 Door Crew
Cab 5.7' (2019-Current) Pro Bed
Mounting System
READ ME FIRST
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
1
PBDR001
© 2023 FRONT RUNNER VEHICLE OUTFITTERS
ENG

Advertisement

loading
Need help?

Need help?

Do you have a question about the PBDR001 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Front Runner PBDR001

  • Page 1 Don’t be a hero and muscle through this installation without reading these fitting instructions first! Improper installation of this gear may void certain aspects of your warranty. Before you begin, take a moment and open all your Front Runner Rack Kit boxes and gather the assembly instructions for the various components. A complete kit will contain: 1.
  • Page 2 42 X M8 NUT CAP FRONT SUPPORT BRACKET LEFT HAND SIDE FRONT SUPPORT BRACKET RIGHT HAND SIDE M8 PLUS NUT 3 10 3 11 3 12 3 12 3 14 3 13 3 15 PBDR001_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 M8 x 20 BUTTON HEAD SCREW 16 X M8 x 19 x 2 FLAT WASHER 16 X M8 NYLOC NUT Oil or 13mm Torx 16 X M8 NUT CAP 10mm Anti Seize FRONT PBDR001_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 CHECK ONLINE FOR THE LATEST FITMENT GUIDE WWW.FRONTRUNNEROUTFITTERS.COM GET ORGANIZED IN THE BOX PBAL_1450 TOOLS NEEDED TOP EXTRUSION TOP MIDDLE EXTRUSION BOTTOM EXTRUSION Friend 1450mm PSA STRIP PE60 PBDR001_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 M8 Nyloc Nut (Item 5 & 6) as shown and M8x20 Button head screw and M8 nyloc Nut (Item 12 & 5). Do this on both the LH and RH side DO NOT FULLY TIGHTEN Place the assembly on a suitable surface. © 2023 FRONT RUNNER VEHICLE OUTFITTERS PBDR001_REV_A00...
  • Page 6 Cordless Drill Oil or Use a little anti seize or oil on screw Anti Seize threads before inserting. Note these are Thread Forming Screws. Tightening Torque 25Nm / 18.4 ft lbs PBDR001_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 7 M6x12 Button head screws and M6 Nyloc Nuts (Item 14 & 8). Place the M6 Nut caps (Item 9) over the nyloc 10mm nuts. Tightening Torque: M6 : 8-10Nm / 5.9 ft lb - 7.38 ft lb PBDR001_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 8 Place M6 Nut caps on the M6 Nyloc Nuts. 13mm Fully tighten the top M8 button head bolts. Lorem ipsum 2.12 Fully tighten all the bolts and nuts and place nut caps where needed.. PBDR001_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 9 IMPORTANT! FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.