Service For The Rotating Nozzles; Fig. 7 Mounting Tool Tck7 For Mounting And Dismounting The Rotating Nozzles - Dr. Escherich TAIFUN-CLEAN 014 Operating Instructions Manual

Fig. 7: Mounting tool TCK7 for mounting and dismounting the rotating nozzles
The main body and the nozzles can become outwardly contaminated.
u
Clean the main body and the nozzles with a soft brush and compressed air if they
become dirty.
The smoothly running, special bearings can wear when operating normally. The revs of
the rotating nozzle can thereby change.
u If the revs reduce drastically or the rotating nozzle stops working, change the bear-
ings.

7.3 Service for the Rotating Nozzles

In order to assure faultless running of the rotating nozzle also after the warranty ex-
pires, we offer you as a special service a factory overhaul.
It includes replacement of the worn parts such as bearings and seal as well as thorough
cleaning of all components. Overhaul takes place in our factory according to the de-
gree of contamination and the condition of the rotating nozzles at a fixed service price
conforming to the price list. If further repair work is necessary, e.g. replacement of
faulty parts, the work and parts will be charged accordingly. For this you will receive an
offer for the overhaul/repair after we have received the rotating nozzle and before be-
ginning the work.
u
Please send the rotating nozzle for servicing or repair with a description of the
faults and if possible with the purchase date to:
Dr. Escherich GmbH
Reparaturabteilung
Lockwitzgrund 100
01257 Dresden
Germany
TAIFUN-CLEAN 014/015/016
Maintenance | 7
29