Advertisement

Dr. Escherich GmbH
Höglwörther Straße 1
81369 München
phone: +49 (0)89 31 85 55-0
fax:
+49 (0)89 31 85 55-66
www.dr-escherich.com
Subject to technical changes
Operating Instructions for:
TAIFUN-CLEAN 012/04/05/014/015
TAIFUN-CLEAN COMPACT
110/140/180/240 (AF)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TAIFUN-CLEAN 012 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dr. Escherich TAIFUN-CLEAN 012

  • Page 1 Operating Instructions for: TAIFUN-CLEAN 012/04/05/014/015 TAIFUN-CLEAN COMPACT 110/140/180/240 (AF) Dr. Escherich GmbH Höglwörther Straße 1 81369 München phone: +49 (0)89 31 85 55-0 fax: +49 (0)89 31 85 55-66 www.dr-escherich.com Subject to technical changes...
  • Page 2: Table Of Contents

    Technical Data Daten Spare Parts and Accessories Spare Parts Accessories Drawing and Ordering Codes 10.1 TAIFUN-CLEAN 04 10.2 TAIFUN-CLEAN 05 10.3 TAIFUN-CLEAN 012 10.4 TAIFUN-CLEAN 014 10.5 TAIFUN-CLEAN 015 10.6 TAIFUN-CLEAN Compact 110 10.7 TAIFUN-CLEAN Compact 180 10.8 TAIFUN-CLEAN Compact 180 AF 10.9...
  • Page 3: Description Of Product

    It neutralises electrostatic charges and removes troublesome contamination by means of compressed air (and suction - in the case of TAIFUN-CLEAN 012, 014 and 015). The device is not suitable for use in potentially explosive atmospheres (EX environments). Models suitable for this are available.
  • Page 4 Operating Instructions for TAIFUN CLEAN Fig 1: Function Principle Position Description Ionization system Rotating nozzles Suction (only for TC 014,015, 012,…) Item to be cleaned Tab. 1 www.dr-escherich.com Version 12/09...
  • Page 5: Safety Instructions

    Operating Instructions for TAIFUN CLEAN 2. Safety Instructions If visible damage and possible electrical faults are identified, switch off device immediately! Danger! Danger of injury due to material transport near the device! Safety equipment, e.g. guard plates and ON/OFF switch for immediate shut-down of the system should be provided by the operator! Activate all safety equipment and ON/OFF switch before start-up! Approach the device only when entire system is switched off! Before initial start of the entire system, check that all...
  • Page 6: General Safety Instructions

    Operating Instructions for TAIFUN CLEAN 3. General Safety Instructions Safety in operational practice can only be assured when all required measures for this are adopted. It is the duty of the machine operator to plan these measures and check their implementation. In case of incorrect operation or misuse, life and limb of the operator, the device and other material assets are endangered.
  • Page 7: Installation

    Table 1). The screws should be re-tightened after two weeks. For TAIFUN-CLEAN 012, the air guide plate LLB included in the delivery package must be almost touching nearby machine components at the side to ensure optimal output ventilation.
  • Page 8 Operating Instructions for TAIFUN CLEAN Optimal Mechanical Maximal Working Clearance Model Working Installation Torque (min –max) Clearance Slot fixture M8 in T- TC 04 15 Nm* 20-150 mm 50 mm slot TC 05 Nuts M8 in T-slot 15 Nm* 20-40 mm 30 mm Borehole TC 014...
  • Page 9: Compressed Air Connection

    Operating Instructions for TAIFUN CLEAN TC 05 TC 015 TC Compact TC 014 Bild 2: Transportrichtung T und Arbeitsabstand W Fig. 2: Transport direction T and work clearance W For lightweight materials, suitable measures must be taken for retaining the min.
  • Page 10 Operating Instructions for TAIFUN CLEAN Operating Air Pressure(p Model Optimal Operating Pressure TAIFUN-CLEAN 1.5 - 3.5 bar 1.5 bar all devices standard versions TAIFUN-CLEAN all 0.8 - 1.5 bar 1.0 bar in special versions with low-pressure rotors Tab. 3 TC Compact TC Compact TC Compact TC Compact...
  • Page 11 Operating Instructions for TAIFUN CLEAN TAIFUN-CLEAN 04 / 014 Diagram 1 TAIFUN-CLEAN 05/015 Diagram 2 www.dr-escherich.com Version 12/09...
  • Page 12: Compressed Air Rotating Nozzles Type Taifun-Clean

    TAIFUN-CLEAN 014 80 mm TAIFUN-CLEAN 015 55 mm TAIFUN-CLEAN 012 55 mm Tab. 5 4.5 Electrical Cables and High Voltage Supply The high voltage cables for supplying the ionizers are connected to the supply unit via plug connection. Only adaptors suitable for the ionizers fitted may be used for supplying the devices with high voltage.
  • Page 13: Start-Up

    In this case the guarantee on the rotation nozzles becomes invalid! 3. TAIFUN-CLEAN 012, 014, 015: Switch on suction system. Optimise suction efficiency by adjusting distance of the device from the material surface (via device mounting), the compressed air via the filter regulating valve and/or the flow rate via the throttle valve on the radial ventilator.
  • Page 14: Errors

    Are the suction hoses fixed tightly to the connection ports? Are the suction hoses undamaged? Are the suction hoses constricted, kinked or blocked? Is the throttle valve open? Returning the Device Dr. Escherich GmbH Lockwitzgrund 100 01257 Dresden www.dr-escherich.com Version 12/09...
  • Page 15: Maintenance

    Operating Instructions for TAIFUN CLEAN 7. Maintenance Only when all components are de-energised! Regular Servicing The device must not come into contact with dampness, wetness or aggressive media! Use test meter type H203 to check the function of the ionization rods regularly and above all after cleaning! Only qualified personnel may clean the ionization rods! Ionization rods must be cleaned as needed, but at least every two weeks using...
  • Page 16 Operating Instructions for TAIFUN CLEAN Replacing Compressed Air Rotation Nozzles Type TAIFUN -CLEAN Remove the rotation nozzles by placing special tool TCK7 on the rotation nozzle and turning in a counter-clockwise direction. Replacing the rotor: Place the key on the rotor and turn in a clockwise direction, until the rotor is hand-tight.
  • Page 17 Operating Instructions for TAIFUN CLEAN TAIFUN-CLEAN 014 TAIFUN-CLEAN 015 Fig. 4 Changing the Ionisation Systems 1. Release the attach screw(s) as shown in Fig. 4. 2. Pull out the rod carefully in the direction shown. 3. Replace with a new rod in the reverse order, when necessary, at least every 4 weeks TAIFUN-CLEAN Compact / 140/ 180/ 240, Compact 140/180/240 AF (Fig.
  • Page 18 Operating Instructions for TAIFUN CLEAN TAIFUN-CLEAN 012 Release the set-screw for attaching the punctuator. Pull out the ionizer upwards out of the holder. Replace with a new ionizer in the reverse order. TAIFUN-CLEAN Compact 110 (Fig. 5 right): Release the cable fastener or holding bracket.
  • Page 19 Operating Instructions for TAIFUN CLEAN 8. Technische Daten Description TC012 TC04 TC05 TC014 TC015 Ionisation rods 1x/2x SP55 Suction connection Ø 55 Ø 80 Ø 55 ports (mm) Compressed air support Ø 70 Ø 130 mm Ø 70 mm Ø 130 mm Ø...
  • Page 20: Spare Parts And Accessories

    Operating Instructions for TAIFUN CLEAN 9.Spare Parts and Accessories 9.1 Spare Parts Description Type Item Please refer to type on manf. spec. plate Ionisation system Rotation nozzle: TAIFUN-CLEAN 04 / 014 TCR7A130 E090 TAIFUN-CLEAN Compact 140 TCR7A95 TAIFUN-CLEAN Compact 180 TCR7A130 E090 TAIFUN-CLEAN Compact 240...
  • Page 21: Accessories

    Operating Instructions for TAIFUN CLEAN 9.2 Accessories Type Description Order No. Guide plate for optimising suction Air guide plate effect (for TAIFUN-CLEAN 012, 014 On request and 015) TCK7 Tool for installing rotation nozzle E385 H031 Cleaning fluid for ionization system...
  • Page 22: Drawing And Ordering Codes

    Operating Instructions for TAIFUN CLEAN 10. Drawing and Ordering Codes 10.1 TAIFUN-CLEAN 04 Order code: TC04-AB-C1-C2-EX TC04: Type AB: Working width in mm C1: HT cable length in m C2: Compressed air hose in m EX: Ex version 10.2 TAIFUN-CLEAN 05 Order code: TC05-AB-C1-C2-EX TC05: Type AB: Working width in mm...
  • Page 23: Taifun-Clean 012

    Operating Instructions for TAIFUN CLEAN 10.3 TAIFUN-CLEAN 012 Order code: TC012-X-C LLB-H-B X: Ionization (quantity) C: Cable length in m LLB: Air guide plate H: Air guide plate, height in mm B: Air guide plate, width in mm 10.4 TAIFUN-CLEAN 014...
  • Page 24: Taifun-Clean 015

    Operating Instructions for TAIFUN CLEAN 10.5 TAIFUN-CLEAN 015 Order code: TC015-AB-C1-C2-EX TC015: Type AB: Working width in mm C1: HT cable length in m C2: Compressed air hose in m EX: Ex version 10.6 TAIFUN-CLEAN Compact 110 Order code: TCC110-C-00 TCC110: Type C: Cable length in m - 23 -...
  • Page 25: Taifun-Clean Compact 180

    Operating Instructions for TAIFUN CLEAN 10.7 TAIFUN-CLEAN Compact 180 Order code: TCC180-C-00 TCC180: Type C: Cable length in m 10.8 TAIFUN-CLEAN Compact 180 AF Order code: TCC180-C-AF TCC180: Type C: Cable length in m AF: Airflow variant (laminate power) - 24 - www.dr-escherich.com Version 12/09...
  • Page 26: Taifun-Clean Compact Special Version

    Operating Instructions for TAIFUN CLEAN 10.9 TAIFUN-CLEAN Compact Special Version Type TCC-140-02-0H TCC-180-02-0H TCC-240-02-0H Type TCC-140-02-AH TCC-180-02-AH TCC-240-02-AH Type TCC-110-02-0H - 25 - www.dr-escherich.com Version 12/09...
  • Page 27: Taifun-Clean Rotating Nozzles

    Operating Instructions for TAIFUN CLEAN 10.10 TAIFUN-CLEAN Rotation Nozzles - 26 - www.dr-escherich.com Version 12/09...
  • Page 28 Operating Instructions for TAIFUN CLEAN Specified use The TAIFUN-CLEAN rotation nozzles are designed for use in the TAIFUN-CLEAN surface cleaning systems. By their rotational action they generate a pulsating, highly turbulent airflow with high cleaning effect. They are designed exclusively for operation with oil-free, dry and filtered compressed air conforming to DIN ISO 8573-1 standard class 3.
  • Page 29 Operating Instructions for TAIFUN CLEAN Description Typ lt. Best. Nr. Rotation nozzle TAIFUN-CLEAN 04 / 014 Compact 180 TCR7A130 E090 Rotation nozzle TAIFUN-CLEAN 04 / 014 EX TCR7A130EX E106 Rotation nozzle TAIFUN-CLEAN Compact 140 TCR7A95 E111 Rotation nozzle TAIFUN-CLEAN Compact 140 EX TCR6A95EX E117 Rotation nozzle TAIFUN-CLEAN Compact 240...
  • Page 30 Operating Instructions for TAIFUN CLEAN - 29 - www.dr-escherich.com Version 12/09...
  • Page 31: Product Overview

    Operating Instructions for TAIFUN CLEAN Product Overview Electrostatics Charging Systems Electrostatic Discharge – Short range Electrostatic Discharge –Wide range Cleaning systems Manual Cleaning Cleaning of Geometrical Parts Cleaning of Webs und flat Surfaces Suction & Control ESUC – Suction & Control Cleaning Solutions UNIMASTER –...
  • Page 32 Operating Instructions for TAIFUN CLEAN For a complete product overview please see our www.dr-escherich.com Dr. Escherich catalogue or online at Dr. Escherich GmbH Höglwörther Straße 1 81369 München · Germany Telefon +49 (0) 89 31 85 55-0 Telefax +49 (0) 89 31 85 55-66 E-Mail info@dr-escherich.com...

Table of Contents