TYM TX1500 Manual
  1. Manuals
  2. Brands
  3. TYM Manuals
  4. Tractor
  5. TX1500
  6. Manual

TYM TX1500 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WE GREATLY APPRECIATE YOUR PURCHASING OF TONGYANG EQUIPMENT
This operator's manual describes how to operate the machine and precautions for your safety.
■
Please read this manual carefully before use and keep this manual handy and near the machine after reading.
■
Disassembling, repairing or modifying the equipment without understanding how to operate the equipment may be
■
the reason for accident or breakdown.
When lease or transfer this machine to another, be sure to hand over this manual to the user. In case the manual is
■
lost or damaged, contact your local authorized dealer or distributor immediately to ask for a new manual
Any component or specification of the machine can be subject to change or modification in accordance with the de-
■
sign change. Therefore, if there is any ambiguous part, contact a Tongyang distributor or an authorized dealer near-
by.
Warning symbols are particularly important for safety so follow the instructions with special attention.
Meaning of each sign is shown as the following.
This symbol indicates an urgent condition that may result in harm, fatal injury or even death if this
DANGER
instruction is ignored.
This symbol indicates a potential condition that may result in harm, fatal injury or even death if this
WARNING
instruction is ignored.
This symbol indicates a condition that may result in a minor injury if the instruction is ignored.
CAUTION
This symbol indicates information of working procedures, and information about maintenance, re-
NOTE
garding this equipment.
※ This manual includes 「For the safe operation」 chapter for the safety of user. Be sure to read this chapter be-
fore operation.
TX1500-영문-00(안).indd 1
PREFACE
.
2012-12-17 오후 2:22:03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX1500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TYM TX1500

Summary of Contents for TYM TX1500

  • Page 1 WE GREATLY APPRECIATE YOUR PURCHASING OF TONGYANG EQUIPMENT This operator’s manual describes how to operate the machine and precautions for your safety. ■ Please read this manual carefully before use and keep this manual handy and near the machine after reading. ■ Disassembling, repairing or modifying the equipment without understanding how to operate the equipment may be ■ the reason for accident or breakdown. When lease or transfer this machine to another, be sure to hand over this manual to the user. In case the manual is ■ lost or damaged, contact your local authorized dealer or distributor immediately to ask for a new manual Any component or specification of the machine can be subject to change or modification in accordance with the de- ■ sign change. Therefore, if there is any ambiguous part, contact a Tongyang distributor or an authorized dealer near- Warning symbols are particularly important for safety so follow the instructions with special attention. Meaning of each sign is shown as the following. This symbol indicates an urgent condition that may result in harm, fatal injury or even death if this DANGER instruction is ignored. This symbol indicates a potential condition that may result in harm, fatal injury or even death if this WARNING instruction is ignored. This symbol indicates a condition that may result in a minor injury if the instruction is ignored. CAUTION This symbol indicates information of working procedures, and information about maintenance, re- NOTE garding this equipment. ※ This manual includes 「For the safe operation」 chapter for the safety of user. Be sure to read this chapter be- fore operation. TX1500-영문-00(안).indd 1 2012-12-17 오후 2:22:03...
  • Page 2 ■ All employees of our company work hard to understand and to attain the safety goal of the equipment. ■ For doing so, we develop and perform the product safety program system- atically in all the processes from procuring raw materials to design, manu- facturing, and distribution. ■ Our company set up and run PL management system in order to provide customers with fast and professional service after product sales. TX1500-영문-00(안).indd 2 2012-12-17 오후 2:22:03...
  • Page 3 DESCRIPTION OF SYMBOLS AND TECHNICAL TERMS ■ SYMBOL MARK The following symbol marks in control device are used for operation and maintenance. Keep in mind the meaning of the following symbol marks so as to operate correctly. Engine speed “High speed” Parking brake Differential lock "disengaging" Engine speed “Low speed” A/C activation PTO "engaging" Hazard flasher Cruise control PTO "disengaging" Headlamp "high beam" Lift arm "lifting" Wiper Headlamp "low beam" Lift arm "lowering" Blower speed Horn Differential lock "engaging" 4WD suspension Turn indicator TX1500-영문-00(안).indd 3 2012-12-17 오후 2:22:03...
  • Page 4 C ontrol panel Device to control lifting and lowering operation of implement  J oystick lever Lever to control loader (If equipped with loader)  E xternal lifting /  Switch to lift and lower implement from out of cabin lowering control switch C ruise control Device to maintain constant driving speed  F inger wheel Wheel to control external hydraulic pressure  F ront axle suspension Device to absorb shock delivered from road surface for front axle  TX1500-영문-00(안).indd 4 2012-12-17 오후 2:22:04...

  • Page 5: Table Of Contents

    6. WHEN GETTING ON/OFF THE TRUCK ....1 -18 7. WHEN WORKING IN PADDY FIELD ....1 -20 8. AFTER DAILY WORK IS COMPLETED ....1 -23 9. FOR LONG-TERM STORAGE ......1 -24 TX1500-영문-00(안).indd 1 2012-12-17 오후 2:22:04...

  • Page 6: General Precautions

     clean at all times. before using it. You may be subject to an unex- There is a possibility of fire or ex- Using a cellular phone while driv- pected accident because of inter- ing can distract your driving result- plosion. vention on the operation of brake, ing in an unexpected accident. clutch and acceleration pedal. -  TX1500-영문-00(안).indd 2 2012-12-17 오후 2:22:06...
  • Page 7 You may be entangled in mov- It is easy to operate wrong so that it can cause an unexpected acci- ing parts or slip on the machine. If it can cause an unexpected acci- dent. these happen, an unexpected acci- dent. dent may occur. I should not drive today. Cigarette Scarf Towel on the waist Slippers TX1500-영문-00(안).indd 3 2012-12-17 오후 2:22:08...
  • Page 8 M ake sure to check if front and aged or bent, replace it with a  new one immediately. rear wheel is assembled correct- If not fastening your seat belt, it Modifying the machine may dam- An unexpected accident may hap- can lead to severe injuries or even age the system and even cause an pen due to the poor maintenance. death in case of a rollover or colli- accident. sion accident. - 4 TX1500-영문-00(안).indd 4 2012-12-17 오후 2:22:09...
  • Page 9 Do not jump on or off the machine. Do not park the machine close to the machine. Also, do not put any any flammable material such as object on the machine. Keep peo- dry grass, rice straw, cloth, etc, ple away from the machine. It may cause an unexpected acci- Losing balance may lead to a fall Heating part may cause a fire. dent. or injury. TX1500-영문-00(안).indd 5 2012-12-17 오후 2:22:10...
  • Page 10 If using fuel other than the speci- You can't signal other workers or fied, it can affect the engine perfor- machines around properly, leading mance and tractor life. to an accident. - 6 TX1500-영문-00(안).indd 6 2012-12-17 오후 2:22:11...

  • Page 11: During Maintenance And Cleaning

    P rop the rear wheels if it is on a  W hen refueling, keep flammable and stop the engine in advance.  slope. items such as lit cigarette away from the machine. A fter refueling, tighten the fuel  cap thoroughly and remove any spilled fuel. The implement may fall abruptly, If not applying parking brake, the Any left fuel can catch fire or cause causing an injury or accident. machine can move abruptly which fire burns. can cause an accident. TX1500-영문-00(안).indd 7 2012-12-17 오후 2:22:12...
  • Page 12 I f there is any leak, replace it im-  mediately. R eplace the fuel hose every   years. It can catch fire. It can pollute the environment. The battery produces hydrogen gas which is flammable and even explosive. Smoke puffing -  TX1500-영문-00(안).indd 8 2012-12-17 오후 2:22:13...
  • Page 13  negative (-) battery cable first. only the prescribed authentic I f the fluid was in contact with  battery. your eye or if you swallowed the D o not mix the positive and neg-  fluid, get medical attention. ative battery cables. The battery fluid (thin sulfuric acid) A short circuit can burn your skin or A short circuit can burn your skin or can burn your skin, eyes or cloth- catch fire. catch fire. ing. TX1500-영문-00(안).indd 9 2012-12-17 오후 2:22:14...
  • Page 14 (It is stipulated that only the trained personnel can carry out the replacing or repairing work.) If you inflate a tire with too much It can catch fire. It hinders normal driving and may air, the tire can burst and may be cause an accident. the ground for an accident. Smoke puffing - 10 TX1500-영문-00(안).indd 10 2012-12-17 오후 2:22:15...
  • Page 15 T he tools required for mainte- such as iron rod or foil. Also nev-  er use a fuse with over capacity. nance should be kept handy. It is difficult to deal with an unex- You can be trapped in the machine It can lead to a fire or other acci- pected breakdown that may cause and get injured. dents. an accident. Smoke puffing - 11 TX1500-영문-00(안).indd 11 2012-12-17 오후 2:22:15...
  • Page 16 M ake sure to open the radiator  make sure to depressurize the cap after the engine is stopped system before service or inspec- and cooled down. tion. If hydraulic oil under pressure Do not open the cap when the en- Improper service can lead to an in- spurts and gets on your skin, skin gine is hot. Otherwise, hot steam jury. damage can occur. can burn you seriously. - 1 TX1500-영문-00(안).indd 12 2012-12-17 오후 2:22:17...

  • Page 17: When Starting Engine

    The tractor may move abruptly Exhaust fumes are poisonous If anyone including children get enough to make you feel dizzy which can cause an accident. near the machine, it can cause an even to cause brain damage due accident. to the oxygen deprivation. - 1 TX1500-영문-00(안).indd 13 2012-12-17 오후 2:22:18...
  • Page 18 D isengage the clutch and then  start the engine. If the shift gear or clutch is not dis- If the machine move abruptly, it If the planting part is raised unex- engaged, the machine can move may cause an accident. pectedly, it may cause an accident. abruptly and cause an accident. - 14 TX1500-영문-00(안).indd 14 2012-12-17 오후 2:22:18...

  • Page 19: When Driving

    M ake sure to turn off the work  the daytime and at least 00 mm lamps when driving at night. behind the vehicle at nighttime. I t can lead to a collision with an- It can lead to a collision. Unexpected machine damage or  accident can occur. other vehicle. Y ou can obstruct other drivers'  driving, resulting in a possible accident. - 1 TX1500-영문-00(안).indd 15 2012-12-17 오후 2:22:20...
  • Page 20 Drive at a low speed.  the machine. lever (sensitivity lever) is set at W hen turning, reduce the engine  「fixed」position. speed. W hen getting off the machine,  stop the engine and remove the ignition key. It may cause a personal injury. It may lead to overturn the ma- Moving machine can be the reason chine. for an unexpected accident. - 16 TX1500-영문-00(안).indd 16 2012-12-17 오후 2:22:20...
  • Page 21 Make sure that the left and right Use the towing hitch for towing. steering wheel or seat during driv- brake pedals are interlocked be- Never use the axle or top link ing. fore driving on a road. bracket to tow anything. I nterlock the left and right brake  pedals. It can cause mechanical failure or Unstable steering wheel operation Braking only at one side can cause rollover. can lead to a collision and rollover. an accident. - 1 TX1500-영문-00(안).indd 17 2012-12-17 오후 2:22:21...

  • Page 22: Driving On Narrow Farm Road, Bumpy Road, Or Slope

    O n a d o w n h i l l , r e d u c e t h e  shoulder. speed and apply the engine R educe the speed and drive with  brake. care after rain or when it is rain- ing. The edges can collapse and the The trans-planter can roll over. Increasing speed may cause an machine can roll over accident. - 1 TX1500-영문-00(안).indd 18 2012-12-17 오후 2:22:22...
  • Page 23 Do not park on a slope. Do not drive on a steep slope. When driving up to a steep slope, If parking on a slope is inevitable, drive backward. stop the engine, apply the parking brake and then place prop under the rear wheels. Trans-planter can suddenly move Trans-planter can roll over and and cause an accident. cause an accident. - 1 TX1500-영문-00(안).indd 19 2012-12-17 오후 2:22:23...

  • Page 24: When Getting On/Off The Truck

     let anyone get close to the ma- capacity and securely tie down the E nsure that the hooks on the chine. machine with rope on the cargo bed.  Stop the engine of the truck, put the ramp boards are securely en-  shift into the first or backward, ap- gaged to the edge of cargo bed. ply the parking brake and prop the wheels. The machine can lose balance and overturn. - 0 TX1500-영문-00(안).indd 20 2012-12-17 오후 2:22:24...
  • Page 25 Engine brake is not engaged so The machine can fall off of the slope, it leads to a roll over acci- that the machine can fall abruptly truck. dent because the rear part of the that may lead to an accident. machine is heavier. Kwadang!! - 1 TX1500-영문-00(안).indd 21 2012-12-17 오후 2:22:25...

  • Page 26: When Working In Paddy Field

    E nsure that the right and left dren get near the machine.  driving onto the paddy field from the brake pedals are interlocked. P ay attention to the work. When  bank, drive forward at a low speed. D rive slowly while checking turning at the corner of the pad-  D o not operate any shift or do not  whether the bank is collapsing or dy field, make sure to check that turn steering wheel too much on the not. there is no one around and then ramp boards. turn. The machine can lose balance and The trans-planter can roll over. It may lead to an unexpected acci- overturn. dent. -  TX1500-영문-00(안).indd 22 2012-12-17 오후 2:22:26...
  • Page 27 N ever let any come between the  plement, such as a rotavator, wait tractor and implement. until the implement is completely A fter installing the implement,  stopped. check that all connecting pins are firmly tightened. An injury can occur. You can get trapped into the imple- Operator or bystander may suffer ment, leading to an accident. burns. -  TX1500-영문-00(안).indd 23 2012-12-17 오후 2:22:27...
  • Page 28 Draft (plowing, trailer) work  Front loader work D o not get close to a rotating   Front snow removal operation implement.  Escaping from wetted field  Improper use can result in mechanical The machine can be damaged or It may lead to an unexpected acci- failure, such as gear damage, and in- you can get injured. dent. jury. - 4 TX1500-영문-00(안).indd 24 2012-12-17 오후 2:22:29...

  • Page 29: After Daily Work Is Completed

    (remove any foreign materi- S et the hydraulic lever (sensitivity  als). lever)「lock」position. R emove any straw debris, dirt on  the engine, muffler, or fuel tank and clean. If the straw touches the heated Carelessness can move the ma- It can catch fire. part, it can catch fire. chine and cause an accident. Smoke puffing Smoke puffing -  TX1500-영문-00(안).indd 25 2012-12-17 오후 2:22:29...

  • Page 30: For Long-Term Storage

    I f bolts or nuts are loose, tighten  move the ignition key. them immediately. W hen disconnecting the battery  from the equipment, disconnect the negative battery cable first. Children may play with the ma- An unexpected accident may occur A short circuit can lead to a fire. chine which can lead to an acci- due to poor maintenance. dent. Smoke puffing - 6 TX1500-영문-00(안).indd 26 2012-12-17 오후 2:22:30...
  • Page 31 B efore discarding any part, such  tractor. as the battery, or tractor, contact your dealer. M ake sure to keep the annual  maintenance schedule and use only the genuine parts for re- placement. The implement may fall abruptly, Poor maintenance can cause an causing an unexpected accident. unexpected accident. -  TX1500-영문-00(안).indd 27 2012-12-17 오후 2:22:31...
  • Page 32 MEMO TX1500-영문-00(안).indd 28 2012-12-17 오후 2:22:31...
  • Page 33 ① Engine (except for the fuel device and anterior unit), and power transmission gear are within 2 years or 400 hours of use. Here, power transmission gear is defined as intermittence, shift gears, brake, differential motion, and reduction gear. ② Within 1 year or 200 hours of use, except for ① TX1500-영문-00(안-보증서).indd 1 2012-12-17 오후 2:22:53...
  • Page 34 Therefore, for the safety, per- form the inspection and maintenance in accordance with the contents of the user’s manual and warranty. TX1500-영문-00(안-보증서).indd 2 2012-12-17 오후 2:22:54...
  • Page 35 ※ Our company will do our best to respond to any above mentioned warranty cases. If there is any complaint, please contact our customer service (1588-4533) and we will support with all our hearts. TONG YANG CORPORATION Namsandong 604-9, Changwon city, Kyungsangnamdo Tel. (055) 279-4400 Customer service: 1588-4533 TX1500-영문-00(안-보증서).indd 3 2012-12-17 오후 2:22:57...
  • Page 36 TX1500-영문-00(안-보증서).indd 4 2012-12-17 오후 2:22:57...
  • Page 37 1. Notes about Warranty Information inspect down Warranty and Envi- ronment Training 2. Environment preservation, equip- 4. Inspecting electric system ment, and disposal I confirm that I sincerely completed the training on the product use. Year Month User: (Signature) TX1500-영문-00(안-보증서).indd 5 2012-12-17 오후 2:22:58...
  • Page 38 Additional Tools 1. Availability of user’s manual, Warning Decal 1. Status in the attached location tools, and parts It is confirmed that there is nothing wrong with the product before delivery. Year Month Inspector: (Signature) TX1500-영문-00(안-보증서).indd 6 2012-12-17 오후 2:22:58...
  • Page 39 1. Notes about Warranty Information inspect down Warranty and Envi- ronment Training 2. Environment preservation, equip- 4. Inspecting electric system ment, and disposal I confirm that I sincerely completed the training on the product use. Year Month User: (Signature) TX1500-영문-00(안-보증서).indd 7 2012-12-17 오후 2:22:58...
  • Page 40 TX1500-영문-00(안-보증서).indd 8 2012-12-17 오후 2:22:58...
  • Page 41 INDEX GENERAL INFORMATION DESCRIPTION OF OPERATING SYSTEM OPERATION WORK PROCEDURE MAINTENANCE STORAGE AND DISPOSAL TROUBLESHOOTING SAFETY STANDARD FOR FARM WORK APPENDIX INDEX WARRANTY INFORMATION TX1500-영문-01(가).indd 1 2012-12-17 오후 2:23:31...
  • Page 42 6. TURNING IN FIEld ........3-5 10. chEckING hOSES ........5-15 7. STOppING ANd pARkING ......3-6 11. chEckING ElEcTRIc SYSTEm ....5-15 8. dRIVING ON SlOpE ........3-6 12. chEck ANd AdjUST EAch pART ... 5-21 TX1500-영문-01(가).indd 2 2012-12-17 오후 2:23:31...
  • Page 43 1. mENdING ANd mAINTAINING ThE WARNING dEcAl ..11-9 1. INSTRUcTION BEFORE USE ....... 8-2 2. chEckUp lIST BEFORE OpERATION ..8-3 3. cAUTIONS dURING ThE WORk ....8-4 4. cAUTIONS WhEN dRIVING ON ThE FARm ROAd .. 8-5 TX1500-영문-01(가).indd 3 2012-12-17 오후 2:23:32...
  • Page 44 TX1500-영문-01(가).indd 4 2012-12-17 오후 2:23:32...

  • Page 45: General Information

    1. EXTRRIOR VIEW ............1-2 2. SAFETY SIGNS ............1-5 3. USE OF THE MACHINE ......... 1-11 4. SUPPLY TERM FOR SERVICE PARTS ....1-11 5. REGARDING THE DIRECTION TERMS OF MACHINE .. 1-11 가 - 1 TX1500-영문-01(가).indd 1 2012-12-17 오후 2:23:32...

  • Page 46: Extrrior View

    GENERAL INFORMATION 1. EXTRRIOR VIEW Wiper (front) Roof Work lamp Side window (Rh) Outside rearview mirror door (Rh) Windshield Muffler hood Sub-fender Tire (front) Tire (rear) Step hood opening/closing lever TX1O201A 1 - 2 TX1500-영문-01(가).indd 2 2012-12-17 오후 2:23:34...
  • Page 47 GENERAL INFORMATION Beacon Outside rearview mirror Side window (lh) door (lh) Turn signal lamp Turn signal/position lamp Brake (stop) lamp Grill TX1O202A 1 - 3 TX1500-영문-01(가).indd 3 2012-12-17 오후 2:23:37...
  • Page 48 Brake (stop) lamp Turn signal lamp Sub-fender Top link External hydraulic pressure port lift arm lift rod pTO shaft lift rod control handle Adjusting link draft hitch lower link TX1O203A 1 - 4 TX1500-영문-01(가).indd 4 2012-12-17 오후 2:23:39...

  • Page 49: Safety Signs

    When putting a new label, wipe off the place to post the label thoroughly and wait till it is dried. Then post the label. Each label has a part number on the bottom. ■ When replacing a part attached with a label with a new part, replace the label as well. 1 - 5 TX1500-영문-01(가).indd 5 2012-12-17 오후 2:23:40...
  • Page 50 When connecting the hydraulic pipe, install them in the operating direction heated parts because of the joystick lever to avoid malfunction it can burn your skin. of an implement. (Label, Caution/Muffler) (label, Warning/differential lock) TX1O204E 1 - 6 TX1500-영문-01(가).indd 6 2012-12-17 오후 2:23:42...
  • Page 51 NO FLAMMABLES weights, be cautious to avoid M a k e s u r e t h a t a back injury. engine is stopped before fueling. (label, Warning/Weight) (label, Warning/Flam- mables) TX1O210E 1 - 7 TX1500-영문-01(가).indd 7 2012-12-17 오후 2:23:46...
  • Page 52 Also, never remove its safety cover. rollover. It can lead to rollover. avoid rollover and collision. (label, Warning/Tilt) (label, Warning/Brakes) (label, danger/pTO) (label, Warning/Tow- TX1O205E ing) 1 - 8 TX1500-영문-01(가).indd 8 2012-12-17 오후 2:23:49...
  • Page 53 2. Apply the parking brake with the brake pedals and lock the implement with the lock switch to avoid depressed. implement fall and injury. TX1O206E 1 - 9 TX1500-영문-01(가).indd 9 2012-12-17 오후 2:23:51...
  • Page 54 GENERAL INFORMATION The tractor model and manufacturer's serial number are marked. Tractor model and manufacturer's serial number TX1O201A 1 - 10 TX1500-영문-01(가).indd 10 2012-12-17 오후 2:23:54...

  • Page 55: Use Of The Machine

    Use for works other than the specified can cause mechanical failure and injuries. The manu- facturer will not hold responsibili- ty for any injury occurred by mis- use of the tractor. front left TX1O208A 1 - 11 TX1500-영문-01(가).indd 11 2012-12-17 오후 2:23:55...
  • Page 56 TX1500-영문-01(가).indd 12 2012-12-17 오후 2:23:55...

  • Page 57: Description Of Operating System

    DESCRIPTION OF OPERATING SYSTEM 1. SwITChES AND INSTRuMENT PANEl ....2-2 2. DRIvING SYSTEM ..........2-13 3. IMPlEMENT lIFT SYSTEM AND TOwING hITCh ... 2-52 4. CABIN ..............2-56 TX1500-영문-02(나).indd 1 2012-12-17 오후 2:24:37...

  • Page 58: Switches And Instrument Panel

    DESCRIPTION OF OPERATING SYSTEM 1. SwITChES AND INSTRuMENT PANEl Instrument cluster Shuttle shift lever Column switch ·Turn signal lamp Hazard flasher ·Horn ·Headlamp Main switch (Ignition switch) TX1O301A 2 - 2 2 - 2 TX1500-영문-02(나).indd 2 2012-12-17 오후 2:24:38...
  • Page 59 • switch. Position B - The hazard flasher is activated and the trn signal indicators on the instrument cluster blink as well. 2 -  2 -  TX1500-영문-02(나).indd 3 2012-12-17 오후 2:24:39...
  • Page 60 • When the driving direction is se- tral state on a slope. formance. lected, the forward driving indi- 2 -  2 -  TX1500-영문-02(나).indd 4 2012-12-17 오후 2:24:40...
  • Page 61 This lever is not automatically re- turned to the neutral position. Push the lever down with the low Therefore, set it back to the neu- beam activated. tral position after turn. 2 -  2 -  TX1500-영문-02(나).indd 5 2012-12-17 오후 2:24:42...
  • Page 62 (2) 1st trailer turn signal indicator (spare) (2) 2nd trailer turn signal indicator (spare) (2) Engine oil pressure warning lamp (28) Engine caution indicator (29) Engine warning lamp (30) Air cleaner filter contamination indicator 2 -  2 -  TX1500-영문-02(나).indd 6 2012-12-17 오후 2:24:43...
  • Page 63 The last digit indicates one tenth The engine can be damaged if in- hours. creasing its speed too fast. Example) The time of use illustrated above is 2 hours and 0 minutes. 2 -  2 -  TX1500-영문-02(나).indd 7 2012-12-17 오후 2:24:45...
  • Page 64 • Use fuel for winter season in win- structions. This blinks along with the right turn ter to enhance engine starting per- signal lamp. formance. 2 - 8 2 - 8 TX1500-영문-02(나).indd 8 2012-12-17 오후 2:24:46...
  • Page 65 This comes on while the cruise con- any unnecessary electrical devices trol (constant speed setting) is acti- and have your vehicle checked by vated. Cruise your workshop immediately. control indicator 2 - 9 2 - 9 TX1500-영문-02(나).indd 9 2012-12-17 오후 2:24:48...
  • Page 66 • ON - The PTO shaft is rotating. suspension. • OFF - The PTO shaft is stopped. Front axle PTO indicator suspension indicator 2 - 10 2 - 10 TX1500-영문-02(나).indd 10 2012-12-17 오후 2:24:49...
  • Page 67 1st trailer turn signal function of the lubrication system. indicator (spare) Check the engine oil immediately and have your vehicle serviced by your workshop as necessary. 2 - 11 2 - 11 TX1500-영문-02(나).indd 11 2012-12-17 오후 2:24:51...
  • Page 68 The engine caution indicator and en- gine warning lamp indicate any faulty state of the engine. If these come on or blink, have your vehicle serviced by your workshop immediately. 2 - 12 2 - 12 TX1500-영문-02(나).indd 12 2012-12-17 오후 2:24:51...

  • Page 69: Driving System

    As it is possible to drive the vehicle without any clutch operation, use the clutch pedal only when it is nec- essary. Brake pedal Driving Accelerator clutch pedal pedal TX1O316A 2 - 1 2 - 1 TX1500-영문-02(나).indd 13 2012-12-17 오후 2:24:52...
  • Page 70 Do you place your foot on the brake pedal while driving. The vehicle op- eration may become unstable. • If the engaging hook is disen- gaged, the warning lamp is illumi- nated. 2 - 1 2 - 1 TX1500-영문-02(나).indd 14 2012-12-17 오후 2:24:53...
  • Page 71 Releasing pedal driving with the shuttle shift lever while the parking brake is applied. Decreases the engine and trac- tor speeds. To drive the tractor, release the parking brake first. 2 - 1 2 - 1 TX1500-영문-02(나).indd 15 2012-12-17 오후 2:24:54...
  • Page 72 Front external hydraulic pressure control joystick lever Multifunction lever External hydraulic pressure con- trol finger wheel Vehicle speed Engine speed control wheel control wheel Neutral switch Creep speed switch TX1O321A 2 - 1 2 - 1 TX1500-영문-02(나).indd 16 2012-12-17 오후 2:24:55...
  • Page 73 (R) on the instrument clus- with the last set speed. pressed as a safety measure. ter is illuminated accordingly. • With the activation button on the 2 - 1 2 - 1 TX1500-영문-02(나).indd 17 2012-12-17 오후 2:24:56...
  • Page 74 Pulling the lever to the left raises As long as the hold button is de- the bucket while pushing it to the pressed, the reduction ratio of the right lowers the bucket. transmission remains constant. 2 - 18 2 - 18 TX1500-영문-02(나).indd 18 2012-12-17 오후 2:24:57...
  • Page 75 There- fore, when connecting the hydrau- lic pipes, set the valve connection according to the operating direc- tions specified on the label at- tached to the joystick lever. 2 - 19 2 - 19 TX1500-영문-02(나).indd 19 2012-12-17 오후 2:24:58...
  • Page 76 • It is possible to set the value for each hydraulic port through the control monitor. 2 - 20 2 - 20 TX1500-영문-02(나).indd 20 2012-12-17 오후 2:24:59...
  • Page 77 2 - 21 2 - 21 TX1500-영문-02(나).indd 21 2012-12-17 오후 2:24:59...
  • Page 78 Pulling vehicle speed control trol wheel stops its operation when wheel backward - Decreases the the accelerator pedal is depressed engine and tractor speeds. while the wheel is in operation. 2 - 22 2 - 22 TX1500-영문-02(나).indd 22 2012-12-17 오후 2:25:00...
  • Page 79 Construction work Make sure to use the brake in speed mode can be set from the the neutral state on a slope. • Working with front snow plow control monitor. 2 - 2 2 - 2 TX1500-영문-02(나).indd 23 2012-12-17 오후 2:25:00...
  • Page 80 1000 RPM and 100 RPM. the unit. with an implement lifted. • Make sure that the cable is not close to or over any electric or electronic lead while welding. 2 - 2 2 - 2 TX1500-영문-02(나).indd 24 2012-12-17 오후 2:25:01...
  • Page 81 (B) Stop (C) Lower lift arm (D) Lower lift arm quickly When releasing the lever in this posi- tion, the lever is returned to the posi- tion "C." TX1O378A 2 - 2 2 - 2 TX1500-영문-02(나).indd 25 2012-12-17 오후 2:25:03...
  • Page 82 For example, when the sensitivity is - Turning it clockwise to its end de- set to the high level, slight draft re- activates the draft function. sistance makes the implement lifted instantly. 2 - 2 2 - 2 TX1500-영문-02(나).indd 26 2012-12-17 오후 2:25:03...
  • Page 83 Stop position first and move it the hydraulic system against im- use. to the lifting position (A). pact from an swinging implement. 2 - 2 2 - 2 TX1500-영문-02(나).indd 27 2012-12-17 오후 2:25:04...
  • Page 84 Turning it When the working depth in a floating mode. field with an implement chang- 2 - 28 2 - 28 TX1500-영문-02(나).indd 28 2012-12-17 오후 2:25:04...
  • Page 85 DESCRIPTION OF OPERATING SYSTEM Electronic lift unit control panel Limp home mode switch Differential lock switch PTO switch 4WD switch Front axle suspension switch TX1O334A 2 - 29 2 - 29 TX1500-영문-02(나).indd 29 2012-12-17 오후 2:25:05...
  • Page 86 Also, It is automatically deacti- When the differential lock is acti- vated when the angle of the front vated, all front and rear wheels are wheels is over 0 degrees. controlled by it. 2 - 0 2 - 0 TX1500-영문-02(나).indd 30 2012-12-17 오후 2:25:06...
  • Page 87 When the driving speed is over gine again automatically engages lower moving height. The left and 20 km/h, the 4WD is automatically the 4WD. right sides are operated separately. deactivated. 2 - 1 2 - 1 TX1500-영문-02(나).indd 31 2012-12-17 오후 2:25:07...
  • Page 88 Pressing the lower section of the matically selected. switch drives the tractor backward. • Most systems, except the hydrau- lic system, are not operational. 2 - 2 2 - 2 TX1500-영문-02(나).indd 32 2012-12-17 오후 2:25:07...
  • Page 89 PTO. When the PTO is in neutral, the Front axle suspension PTO switch is automatically re- turned to the "OFF" state. Diagnosis Setting Automatic PTO Turn-up lifting 2 -  2 -  TX1500-영문-02(나).indd 33 2012-12-17 오후 2:25:09...
  • Page 90 PTO and the PTO RPM with the PTO engaged. 4WD indicator ESC button Automatic PTO indicator OK button Reverse driving lifting indicator Arrow buttons Turn-up lifting indicator Floating/detent function activation 2 -  2 -  TX1500-영문-02(나).indd 34 2012-12-17 오후 2:25:11...
  • Page 91 Pressing the ( ) button opens the additional transmission status menu. Press the ESC ( ) button to return Engine intake air temperature to the main menu. (unit: °C) Engine intake air pressure (unit: kPa) 2 -  2 -  TX1500-영문-02(나).indd 35 2012-12-17 오후 2:25:13...
  • Page 92 Reverse, Neutral and Pow- er Zero. Seat switch ON/OFF status Parking brake ON/OFF status Left brake pedal ON/OFF status Right brake pedal ON/OFF status 2 -  2 -  TX1500-영문-02(나).indd 36 2012-12-17 오후 2:25:15...
  • Page 93 ( ) symbol between 1 to 0 seconds or set to blink. In this state, only the port infinite. A can be set. 2 -  2 -  TX1500-영문-02(나).indd 37 2012-12-17 오후 2:25:16...
  • Page 94 Pressing the ( ) button opens the - It displays the current status of additional -point hitch status menu. the position/draft sensitivity con- trol knob. - The range is 0 to 100 %. 2 - 8 2 - 8 TX1500-영문-02(나).indd 38 2012-12-17 오후 2:25:17...
  • Page 95 This displays the ON/OFF status of the automatic mode switch for the front axle suspension. This displays the ON/OFF sta- tus of the block mode switch for the front axle suspension. 2 - 9 2 - 9 TX1500-영문-02(나).indd 39 2012-12-17 오후 2:25:19...
  • Page 96 - It displays the left cylinder posi- code, contact your dealer. tion of the front axle suspension. - The range is -50 to 154 %. 2 - 0 2 - 0 TX1500-영문-02(나).indd 40 2012-12-17 오후 2:25:20...
  • Page 97 Pressing the ESC ( ) button re- Pressing the ( ) button opens turns to the main menu. the error code menu ( 2 - 1 2 - 1 TX1500-영문-02(나).indd 41 2012-12-17 오후 2:25:21...
  • Page 98 Pressing the ESC ( ) button re- ton, the adjusted value is set and disengaging position setting turns to the setting menu. the cursor no longer blinks. Time and unit setting 2 - 2 2 - 2 TX1500-영문-02(나).indd 42 2012-12-17 오후 2:25:23...
  • Page 99 - It determines whether the upper ⑥ Pressing the ESC ( ) button re- limit for the engine RPM is to be turns to the setting menu. enabled (ON/OFF). 2 -  2 -  TX1500-영문-02(나).indd 43 2012-12-17 오후 2:25:24...
  • Page 100 ④ When pressing the OK ( ) but- ton, the adjusted value is set and the cursor no longer blinks. 2 -  2 -  TX1500-영문-02(나).indd 44 2012-12-17 오후 2:25:26...
  • Page 101 ⑥ Press the OK ( ) button. Then, the cursor blinks and you can adjust the value from the first digit. 2 -  2 -  TX1500-영문-02(나).indd 45 2012-12-17 오후 2:25:28...
  • Page 102 ③ Use the Up ( ) and Down ( buttons to switch to AUTO. ④ When the setting is switched to AUTO, the arrow next to the ( button blinks. 2 -  2 -  TX1500-영문-02(나).indd 46 2012-12-17 오후 2:25:29...
  • Page 103 OK ( ) button. ing tires. In the Setting menu, pressing the ) button once sets the turn-up lifting function ON. Pressing the button again sets it OFF. 2 -  2 -  TX1500-영문-02(나).indd 47 2012-12-17 오후 2:25:31...
  • Page 104 ) buttons to change the value as desired. ④ Press the OK ( ) button. Then, the cursor blinks. ⑤ Pressing the ESC ( ) button re- turns to the setting menu. 2 - 8 2 - 8 TX1500-영문-02(나).indd 48 2012-12-17 오후 2:25:32...
  • Page 105 1, 2,  and . Pressing the ESC ( ) button re- turns to the setting menu. ⑤ Pressing the ESC ( ) button re- turns to the setting menu. 2 - 9 2 - 9 TX1500-영문-02(나).indd 49 2012-12-17 오후 2:25:34...
  • Page 106 ⑦ After setting is completed, press the OK ( ) button. Then, the cursor is illuminated. ⑧ Pressing the ESC ( ) button re- turns to the setting menu. 2 - 0 2 - 0 TX1500-영문-02(나).indd 50 2012-12-17 오후 2:25:36...
  • Page 107 Also, nev- ing driving can result in a collision er turn the steering wheel com- and rollover. Never release the pletely continuously. steering wheel during driving. 2 - 1 2 - 1 TX1500-영문-02(나).indd 51 2012-12-17 오후 2:25:36...

  • Page 108: Implement Lift System And Towing Hitch

    DESCRIPTION OF OPERATING SYSTEM 3. IMPlEMENT lIFT SYSTEM AND TOwING hITCh Top link Lift arm Lift rod Lift rod adjusting handle Adjusting link Lower link TX1O362A 2 - 2 2 - 2 TX1500-영문-02(나).indd 52 2012-12-17 오후 2:25:37...
  • Page 109 The 1st and 2nd (2) Adjust the length according to holes from the top are generally the type of an implement. used. 2 -  2 -  TX1500-영문-02(나).indd 53 2012-12-17 오후 2:25:39...
  • Page 110 • Engage the top link with the hook. 2 -  2 -  TX1500-영문-02(나).indd 54 2012-12-17 오후 2:25:41...
  • Page 111 • Before using an implement, make sure to read its owner's manual. 2 -  2 -  TX1500-영문-02(나).indd 55 2012-12-17 오후 2:25:43...

  • Page 112: Cabin

    DESCRIPTION OF OPERATING SYSTEM 4. CABIN Wiper (front) Roof Work lamp Side window (RH) Outside rearview mirror Door (RH) Windshield Muffler Hood Sub-fender Tire (front) Tire (rear) Step Hood opening/closing lever TX1O201A 2 -  2 -  TX1500-영문-02(나).indd 56 2012-12-17 오후 2:25:45...
  • Page 113 Brake (stop) lamp Turn signal lamp Sub-fender Top link External hydraulic pressure port Lift arm Lift rod PTO shaft Lift rod adjusting handle Adjusting link Towing hitch Lower link TX1O203A 2 -  2 -  TX1500-영문-02(나).indd 57 2012-12-17 오후 2:25:47...
  • Page 114 Press the button on the lever to Make sure to check it in advance. open the door from outside. Push the lever down to open the door from inside. 2 - 8 2 - 8 TX1500-영문-02(나).indd 58 2012-12-17 오후 2:25:48...
  • Page 115 WARNING caught by the handle edge or in the window. • Do not turn on the work lamps at nighttime. They can obstruct other drivers' view. 2 - 9 2 - 9 TX1500-영문-02(나).indd 59 2012-12-17 오후 2:25:49...
  • Page 116 (10) Cigarette lighter Press in the cigarette lighter. Then, it automatically pops out with a click- ing sound within a few seconds for use. 2 - 0 2 - 0 TX1500-영문-02(나).indd 60 2012-12-17 오후 2:25:50...
  • Page 117 Then, it is automatically fixed to that point. To retract it, press the rewind button on the right top of it. 2 - 1 2 - 1 TX1500-영문-02(나).indd 61 2012-12-17 오후 2:25:50...
  • Page 118 DESCRIPTION OF OPERATING SYSTEM Interior air inlet Interior air inlet Stereo Air conditioner/heater control panel Interior lamp Inside rearview mirror Air conditioner/heater vent TX1O373A 2 - 2 2 - 2 TX1500-영문-02(나).indd 62 2012-12-17 오후 2:25:53...
  • Page 119 Air temperature control dial TX1O391A - heater operation (winter) - 1) heater <how to use> ① To use the heater, turn the tem- perature control dial clockwise. 2 -  2 -  TX1500-영문-02(나).indd 63 2012-12-17 오후 2:25:55...
  • Page 120 Air conditioner dial cessive force to it. TX1O392A - Air conditioner operation (summer) - 2) Air conditioner <how to use> ① To use the air conditioner, turn 2 -  2 -  TX1500-영문-02(나).indd 64 2012-12-17 오후 2:25:56...
  • Page 121 There- fore, any system service should be performed by qualified techni- cians. • For superior cooling performance, keep the engine speed over 1,000 RPM. 2 -  2 -  TX1500-영문-02(나).indd 65 2012-12-17 오후 2:25:56...
  • Page 122 • Open - Recirculation mode • Closed - Fresh air mode 2 -  2 -  TX1500-영문-02(나).indd 66 2012-12-17 오후 2:25:57...
  • Page 123 ② Seatback reclining The angle of the seatback can be adjusted by pulling up the angle control lever. TX1O396A 2 -  2 -  TX1500-영문-02(나).indd 67 2012-12-17 오후 2:25:59...
  • Page 124 • Never adjust the seat during driv- right with the lateral sliding handle ing. pulled down. Pulling up the handle secures the seat. • Sliding distance: ± 25 mm 2 - 8 2 - 8 TX1500-영문-02(나).indd 68 2012-12-17 오후 2:25:59...
  • Page 125 To fix the position, push down the lever. • Pushing down the lever fixes the steering wheel into the position. • Pulling up the lever enables the steering wheel to be adjusted. 2 - 9 2 - 9 TX1500-영문-02(나).indd 69 2012-12-17 오후 2:26:00...
  • Page 126 (19) Secondary seat • Use the secondary seat only to train the driver with the tractor stationary. • Never sit on the secondary seat while the tractor is moving. 2 - 0 TX1500-영문-02(나).indd 70 2012-12-17 오후 2:26:01...

  • Page 127: Operation

    9. CAuTIONs fOR dRIvINg INTO / OuT Of fIEld .. 3-7 10. lOAdINg TO / uNlOAdINg fROm TRuCk ..3-7 11. CAuTIONs fOR dRIvINg ON ROAd ....3-8 12. OPERATION ChECk duRINg dRIvINg ....3-8 TX1500-영문-03(다).indd 1 2012-12-17 오후 2:26:26...

  • Page 128: Engine Starting

    It is rec- ommended to start the engine after the preheat indicator goes off. 3 -  TX1500-영문-03(다).indd 2 2012-12-17 오후 2:26:27...

  • Page 129: Engine Stopping

    If the engine has been running for ventilated area. It can cause car- an extended period of time, stop bon monoxide poisoning by emis- the engine only after idling it for 5 sions. to 10 minutes. 3 - 3 TX1500-영문-03(다).indd 3 2012-12-17 오후 2:26:27...

  • Page 130: Running-In Period

    ⑤ Release the brake pedals. speed in the forward direction. Make sure to check the surroundings care- fully when driving backward. 3 -  TX1500-영문-03(다).indd 4 2012-12-17 오후 2:26:28...

  • Page 131: Turning In Field

    ③ While turning, keep the engine • speed low and turn slowly. To enable the speed control wheel, set it to the lowest speed position and move it to the desired position. 3 - 5 TX1500-영문-03(다).indd 5 2012-12-17 오후 2:26:28...

  • Page 132: Stopping And Parking

    If it is absolutely necessary ation of the parking brake. • When releasing the brake pedals, to park on a slope, chock the rear the tractor moves to the desired wheels. direction slowly. 3 - 6 TX1500-영문-03(다).indd 6 2012-12-17 오후 2:26:28...

  • Page 133: Cautions For Driving Into / Out Of Field

    (3) If the engine stops on ramps, depress the brake pedals immediately and release them slowly to move onto the ground. Then, start the engine again to climb the ramps again. ☞ For detailed precautions, refer to the page SAFETY-0. 3 - 7 TX1500-영문-03(다).indd 7 2012-12-17 오후 2:26:29...

  • Page 134: Cautions For Driving On Road

    • Radiator coolant • Radiator fin for clogging • Fan belt for looseness ☞ For detailed precautions, refer to the page SAFETY-15. If necessary, have your machine checked by your workshop. 3 -  TX1500-영문-03(다).indd 8 2012-12-17 오후 2:26:29...

  • Page 135: Work Procedure

    Work Procedure 1. Precautions for handling imPlement ..4-2 2. general imPlement ........... 4-2 3. tyPes of Work by sPeed table ....4-8 TX1500-영문-04(라).indd 1 2012-12-17 오후 2:26:54...

  • Page 136: Precautions For Handling Implement

    15 cm. er, install an implement to the • Check that the universal joint is back to keep balance (if neces- firmly fixed to the tractor and ro- sary). tavator shaft. 4 -  TX1500-영문-04(라).indd 2 2012-12-17 오후 2:26:54...
  • Page 137 A: Border from (7) to (18). • When driving forward to plow, have the bank on the right side. • Be careful not to press already- 995E001a plowed soil with the wheels. 4 - 3 TX1500-영문-04(라).indd 3 2012-12-17 오후 2:26:55...
  • Page 138 For the sections (8) to (19), plow in a circular pattern. (18) • A: Border (14) Refer to the sequential returning (10) pattern for other details. 995E002a 4 - 4 TX1500-영문-04(라).indd 4 2012-12-17 오후 2:26:56...
  • Page 139 The border shown in the fig- Start ure should be set a little narrow- er than two times of one plowing A: Border (1) width. • Refer to the alternating returning pattern for other details. 995E003a 4 - 5 TX1500-영문-04(라).indd 5 2012-12-17 오후 2:26:57...
  • Page 140 3-point link. the label attached to the side of the joystick lever. Abnormal op- eration of a loader can lead to an accident. 4 - 6 TX1500-영문-04(라).indd 6 2012-12-17 오후 2:26:58...
  • Page 141 30 to 50 cm off the ground distribute the load evenly. and the driving speed below 5 km/ h. When going onto a slope or un- paved area, lower the speed and drive with care. 4 - 7 TX1500-영문-04(라).indd 7 2012-12-17 오후 2:26:59...

  • Page 142: Types Of Work By Speed Table

    Engine: ,00 RPM as standard Full engine speed Creep speed mode Normal mode * The applicable works by speed mentioned above can vary by soil conditions. Select appropriate speed according to the work condition. 4 - 8 TX1500-영문-04(라).indd 8 2012-12-17 오후 2:27:00...

  • Page 143: Maintenance

    9. greasing ............. 5-15 10. checking hOses ..........5-15 11. checking electric systeM ......5-15 12. check and adjust each part ....5-21 13. rOutine Maintenance schedule ....5-22 14. checking electrOnic hydraulic systeM .. 5-25 TX1500-영문-05(마).indd 1 2012-12-17 오후 2:43:50...

  • Page 144: Opening Covers

    Maintenance 1. Opening cOvers ► Opening hOOd hood push the hood opening/closing le- veronthefrontrightsectionofthe hood. then,thehoodisunlockedanditis automaticallyopenedbyitsdamper. lever TX1O501A hood TX1O502A 5-2 TX1500-영문-05(마).indd 2 2012-12-17 오후 2:43:51...

  • Page 145: Inspection Items

    ③ O penthehoodandcheck: ⑤  s tarttheengine,drivethetractor slowlyandcheck: -engineoillevel -emissioncolor -coolantlevel -brakepedaloperation - f an belt for looseness and -Onebrakepedaloperation damage - h andle the heaviness, trem- - a /cbeltforloosenessanddam- blingstatus -coolantgaugeoperation - h ydraulicoperationof3-pointlink 5-3 TX1500-영문-05(마).indd 3 2012-12-17 오후 2:43:51...

  • Page 146: Checking Coolant And Cleaning Grille

    NOTE skin,itcanirritatetheskinand til the engine is sufficiently cooled • Do not clean the radiator fin with down. causeaskincondition.makesure water jet. It can deform the fin. tocleanyourskinwithsoapand waterorhandcleanerthoroughly. 5-4 TX1500-영문-05(마).indd 4 2012-12-17 오후 2:43:53...

  • Page 147: Checking And Changing Engine Oil Each Part

    ②ifthelevelisbelowthelowerlim- it,addoil. engineoil dipstick TX1O625A upper lowerlimit TX1O607A ► checking and changing engine Oil (1) inspection ① pull out the dipstick, wipe its tip and insert it again. then, pull it 5-5 TX1500-영문-05(마).indd 5 2012-12-17 오후 2:43:54...
  • Page 148 • ifengineoilgetsonyourskin,it • canirritatetheskinandcausea afterdrainingoil,tightentheen- skincondition.makesuretoclean gineoildrainplug. yourskinwithsoapandwateror • Add the specified amount of the handcleanerthoroughly. specified engine oil through the filler hole. * t here are one engine oil drain holeoneachsideoftheengine. 5-6 TX1500-영문-05(마).indd 6 2012-12-17 오후 2:43:54...
  • Page 149 ② a fter draining fluid, tighten the thesightglass. ②shellspiraxs4tx transmission fluid drain plug. ② i fthelevelisbelowthelowerlim- ③shellspiraxs4txm ③ a dd the specified amount of it, add fluid. the specified transmission fluid through the filler hole. 5-7 TX1500-영문-05(마).indd 7 2012-12-17 오후 2:43:55...
  • Page 150 ② Unscrew the drain plug at the back to drain oil. As hot oil flows out of the engine first, be careful not to get burnt. ③afterdrainoilcompletely,tightenthedrainplug. ④ Unscrew the filler plug on the front and add the specified amount of oil. ⑤ Tighten the filler plug. Then, tighten the bleeder. 5-8 TX1500-영문-05(마).indd 8 2012-12-17 오후 2:43:56...
  • Page 151 ④ Set the filler hole horizontal to the hole. center of the wheel hub. then, add the specified amount of oil. (3) Oil specification (3) Oil specification dongyanggenuinethf500 gearoilsae90w(apigl-4grade orhigher) 5-9 TX1500-영문-05(마).indd 9 2012-12-17 오후 2:43:57...

  • Page 152: Replacing Filter And Cartridge

    ⑤ a pply a thin film of oil onto the ④ c hecktheoillevelwiththedipstick O-ring and fit a new element to again. If still insufficient, add more. the filter housing by pushing it in. 5-10 TX1500-영문-05(마).indd 10 2012-12-17 오후 2:43:58...
  • Page 153 ① r emovetheengineoilfiltercar- tridgebyturningitcounterclock- wisewithawrench. ② Apply a thin film of oil to the O-ring ofanewcartridgeandinstallthe newcartridgebytighteningitwith ahand.whenitspackingtouches thesealingsurface,turnitapprox. 2/3turnsfurtherwithawrench. ③ Add engine oil to the specified level. ④ r untheengineforapprox.5min- utesandcheckforproperopera- tionthroughtheengineoilwarn- 5-11 TX1500-영문-05(마).indd 11 2012-12-17 오후 2:43:59...

  • Page 154: Checking Fuel System And Replacing Fuel Filter

    • whencheckingthefuelsystem ① p repare a container to collect or fueling, keep flammable items, fuelfromtheoil-waterseparator. suchasalitcigarette,awayfrom ② O penthedrainplug. thetractor.thetractormaycatch ③ a fter a sufficient amount of fuel fire. isdrained,tightenthedrainplug withahand. ④ d onotuseanytool. 5-12 TX1500-영문-05(마).indd 12 2012-12-17 오후 2:44:00...
  • Page 155 ③ Install a new filter. apply a thin film of oil to the O-ring and fit the new filter by tightening it with a hand. when its packing touches the sealing surface,turnitapprox.2/3turns furtherwithawrench. 5-13 TX1500-영문-05(마).indd 13 2012-12-17 오후 2:44:01...

  • Page 156: Air-Cleaner Maintenance

    1,826 1,906 ② u se the genuine element parts wheels only. when handling them, be careful not to contaminate them 1,836 1,836 fixing withoilorothercontaminants. ③ w henreplacingtheelement,de- tachtheelementandremovedirt inthecoverthoroughly. 5-14 TX1500-영문-05(마).indd 14 2012-12-17 오후 2:44:04...

  • Page 157: Greasing

    • ifthebatteryelectrolytegetson placed with their tightening bands your eyes, skin, clothes or ob- every 2 years or when they are ject,rinseitwithwaterthorough- damaged. ly.ifyouswallowedit,drinkalotof water.also,getmedicalattention WARNING immediatelyifacidcontactsyour • ifanyfuelhoseisdamaged,fuel eyeorisswallowed. leaksanditcancatchfire.make suretocheckthefuelhoseand takeanecessaryaction. 5-15 TX1500-영문-05(마).indd 15 2012-12-17 오후 2:44:04...
  • Page 158 ② c hargethebatteryinawell-ven- • White - Insufficient electrolyte it cannot deliver current. if it is tilatedarea. corrodedorcontaminated,wipeit ③ c hargethebattery withthenor- withsandpaperorabrush. mal procedures and avoid quick charging. ④ Open the electrolyte filler hole of thebattery. 5-16 TX1500-영문-05(마).indd 16 2012-12-17 오후 2:44:05...
  • Page 159 ② c onnect the positive terminal of battery. thenormalbatterytothepositive terminalofthedischargedbattery withthejumpcable. ③ c onnectthenegativeterminalof thenormalbatterytotheengine body of the tractor for the dis- chargedbatterywiththejumpca- ble. ④ f irstly,starttheengineoftheve- hicle with the normal battery. then,starttheengineofthetrac- torwiththedischargedbattery. 5-17 TX1500-영문-05(마).indd 17 2012-12-17 오후 2:44:05...
  • Page 160 993F029A leading to a fire. Never use a fuse to avoid fire. withdifferentcapacity.also,never ► checking and replacing useasteelwireorfoilinsteadofa fuse fuse. (1)bodyfusebox fuses are installed in this tractor topreventanypossibleaccidentin caseofwiringcircuitmalfunction. 5-18 TX1500-영문-05(마).indd 18 2012-12-17 오후 2:44:06...
  • Page 161 12v21w newone.(thecabinrelayboxisin- blownfusesand replace them with brake(stop)lamp 12v8w stalledintheroof.) the specified genuine parts. stop/brake(stop)lamp 12v21w/5w backuplamp 12v21w interiorlamp 12v10w worklamp h312v35w 5-19 TX1500-영문-05(마).indd 19 2012-12-17 오후 2:44:07...
  • Page 162 / brake (stOp) laMp ① remove the lamp lens using a ② r emove the bulb by pressing it ③ i nstall the lamp lens by press- flat-bladed screwdriver. and turning it counterclockwise. ingitagainstthecoverfromone fitanewbulbbypressingitturn- side. ingitclockwise. 5-20 TX1500-영문-05(마).indd 20 2012-12-17 오후 2:44:08...

  • Page 163: Check And Adjust Each Part

    ① u nscrew the three mounting boltsofthecompressor. item size Inflation pressure ② c heck the belt tension while tightening the tension adjusting 380/85r28 bolt. ③ p ressthecenterofthebeltwitha filter. If it is deflected for 10 mm, 460/85r38 thetensionisproper. 5-21 TX1500-영문-05(마).indd 21 2012-12-17 오후 2:44:09...

  • Page 164: Routine Maintenance Schedule

    Cleaning fuel filter △ △ ○ ○ ● andreplacingelement checkeveryyearandreplaceasnecessary radiatorcoolant (checkcoolantlevelfrequently) aircleanerelement ● fanbelt checktensionevery50hoursandreplaceasnecessary battery checkandreplenishevery100hoursandreplaceasnecessary radiator&aircleaner hoses ○ ○ hosesandbands replaceevery2years checkingfuelhose hoses ○ ○ andband replaceevery2years cleaningturbocharg- ★ erinlet 5-22 TX1500-영문-05(마).indd 22 2012-12-17 오후 2:44:09...
  • Page 165 ● ● toe-in 0-4mm greasingeachpart Add every 50 hours, daily if working in watery field stroke10mm tightnessoffront/ checkfrequentlybeforedriving rearwheels rubberhoses yearly ○ ○ ○ ○ checkingelectricwir- ○ ○ ○ ○ ○ ○ 5-23 TX1500-영문-05(마).indd 23 2012-12-17 오후 2:44:10...
  • Page 166 TX1O626A Sufficient liftrod grease amount drainhole■checkhole ▲ ⊙fillerhole●greasenipple checklink 26pointsonfront Sufficient grease axle amount 5-24 TX1500-영문-05(마).indd 24 2012-12-17 오후 2:44:10...

  • Page 167: Checking Electronic Hydraulic System

    Ment Of pOsitiOn sensOr/ stops blinking, release for 5 seconds and turn ehr-b (bOsch ecu) the external hitch lifting the ignition switch to • step1:starttheengine. button. the "On" position for 5 seconds. 5-25 TX1500-영문-05(마).indd 25 2012-12-17 오후 2:44:11...
  • Page 168 CAUTION • • step1: t he led on the control errors,thatpreventstheliftcon- panelstopsforapprox.2 trolsfromoperation,hasthehigh- seconds before indicat- estpriority. ingacode. 5-26 TX1500-영문-05(마).indd 26 2012-12-17 오후 2:44:11...
  • Page 169 ○ ● ○ ●●●●●● plied) abnormalpowersupplyofliftarmcontrol- ○ ● ○ ●●●●●●● ler(powerover16vsupplied) defectivepositionsensor ○ ● ○ ●●●●●●●● faultycancommunicationofliftarm ○ ●● ○ ●● controllerpanel defectiveleftdraftsensor ○ ●● ○ ●●● faultycancommunicationofliftarm ○ ●● ○ ●●●● controllerpanel 5-27 TX1500-영문-05(마).indd 27 2012-12-17 오후 2:44:12...
  • Page 170 ○ ●●● ○ ● controllerpanel defectiverightdraftsensor ○ ●●● ○ ●● lowpowersupplyofliftarmcontroller ○ ●●● ○ ●●● faultycancommunicationofliftarm ○ ●●● ○ ●●●● controllerpanel faultycancommunicationofliftarm ○ ●●● ○ ●●●●● controllerpanel 5-28 TX1500-영문-05(마).indd 28 2012-12-17 오후 2:44:12...

  • Page 171: Storage And Disposal

    Storage and diSpoSal 1. tractor Storage ..........6-2 2. USage and diSpoSal ...........6-3 TX1500-영문-06(바).indd 1 2012-12-17 오후 2:28:12...

  • Page 172: Tractor Storage

    (5) Check each bolt and nut for ing. looseness and tighten any loose (7) Remove the key and store it sep- bolt and nut. arately. (6) Set the tire inflation pressure a little higher than the specifica- tion. 6 -  TX1500-영문-06(바).indd 2 2012-12-17 오후 2:28:12...

  • Page 173: Usage And Disposal

    • If wiring is damaged by rodents, its short circuit can start a fire. 6 -  TX1500-영문-06(바).indd 3 2012-12-17 오후 2:28:13...
  • Page 174 MEMO TX1500-영문-06(바).indd 4 2012-12-17 오후 2:28:13...

  • Page 175: Troubleshooting

    1. ENGINE SYSTEM ............. 7-2 2. CLUTCH SYSTEM ............ 7-5 3. BRakE SYSTEM ............7-5 4. STEERING SYSTEM ..........7-6 5. HYdRaULIC SYSTEM ..........7-7 6. ELECTRIC SYSTEM ..........7-8 7. COOLING/HEaTING SYSTEM (ST MOdEL) ..7-10 TX1500-영문-07(사).indd 1 2012-12-17 오후 2:28:39...

  • Page 176: Engine System

    Clean or replace the filter The engine runs irreg- ularly • • Clogged injection nozzle Have it repaired by workshop • • Damaged turbocharger or its inlet Check the inlet/outlet duct and turbocharger 7 -  TX1500-영문-07(사).indd 2 2012-12-17 오후 2:28:39...
  • Page 177 Have it repaired by workshop The engine produces black smoke • • Insufficient nozzle pressure Have it repaired by workshop • • Clogged or carbon on nozzle tip Have it repaired by workshop 7 -  TX1500-영문-07(사).indd 3 2012-12-17 오후 2:28:39...
  • Page 178 The charge warning lamp comes on during • Defective alternator • Have it repaired by workshop driving • • Defective battery Replace the battery • • Damaged fan belt Replace the belt 7 -  TX1500-영문-07(사).indd 4 2012-12-17 오후 2:28:39...

  • Page 179: Clutch System

    Defective brake switch Replace the switch The brake system • Brake system not properly bled • Have the brake system bled by workshop does not react imme- diately to the pedal op- eration 7 -  TX1500-영문-07(사).indd 5 2012-12-17 오후 2:28:39...

  • Page 180: Steering System

    Have it repaired by workshop The free movement of • • the steering wheel is Worn metal parts Have it repaired by workshop excessive • • Free play from each connection Tighten 7 -  TX1500-영문-07(사).indd 6 2012-12-17 오후 2:28:39...

  • Page 181: Hydraulic System

    Clogged oil filter Clean • • Defective hydraulic pump Have it repaired by workshop • • Defective valve Have it repaired by workshop • • Damaged cylinder Have it repaired by workshop 7 - 7 TX1500-영문-07(사).indd 7 2012-12-17 오후 2:28:40...

  • Page 182: Electric System

    • Check and clean the ground and terminal • • Defective horn switch Replace The horn does not op- • • Defective wiring Repair erate • • Damaged horn Repair or replace 7 -  TX1500-영문-07(사).indd 8 2012-12-17 오후 2:28:40...
  • Page 183 Check and clean the ground and terminal • • Blown bulb Replace the bulb The work lamp does not come on • • Contact failure Check and clean the ground and terminal 7 -  TX1500-영문-07(사).indd 9 2012-12-17 오후 2:28:40...

  • Page 184: Cooling/Heating System (St Model)

    • • Loose mounting bolt Tighten the bolt Abnormal pressure is produced • Abnormal condition • Improper refrigerant amount • Adjust for low pressure at • • Defective compressor Replace high temperature 7 - 10 TX1500-영문-07(사).indd 10 2012-12-17 오후 2:28:40...
  • Page 185 Defective blower speed control dial Replace the switch • • • Abnormal motor Defective motor Replace It produces abnormal noise • • • Regular noise Interference with pulley Adjust the compressor's direction • Irregular rattling noise 7 - 11 TX1500-영문-07(사).indd 11 2012-12-17 오후 2:28:40...
  • Page 186 There is no wiring • • Internal failure Replace defect It slips • • Low voltage Check the battery • • • Slipping when rotat- Oil on clutch disc Clean • • Internal failure Replace 7 - 1 TX1500-영문-07(사).indd 12 2012-12-17 오후 2:28:40...

  • Page 187: Safety Standard For Farm Work

    5. InStructIon after uSe ........8-6 6. cautIonS for InSpectIon and maIntenance ... 8-6 7. tractor ..............8-7 8. rIce plantIng machIne ........8-8 9. combIne ..............8-8 10. other requIrementS ........8-9 아 -  TX1500-영문-08(아).indd 1 2012-12-17 오후 2:28:56...

  • Page 188: Instruction Before Use

    - Measures against dust and toxic gas. - Wear an appropriate protective gear. - Measures against the herbicide – wear protective gear to protect respiratory system, eyes and skin. 8 -  TX1500-영문-08(아).indd 2 2012-12-17 오후 2:28:56...

  • Page 189: Checkup List Before Operation

    When getting on and off a truck, have a helper give  you signal and follow his/her lead. Refer to chapter 1 in user’s manual regarding the de-  cals on the machine. 8 -  TX1500-영문-08(아).indd 3 2012-12-17 오후 2:28:56...

  • Page 190: Cautions During The Work

    Do neither stay nor insert foot under the working units.  Be cautious not to let anyone touch the belt . Always  check the connected area of belt. 8 -  TX1500-영문-08(아).indd 4 2012-12-17 오후 2:28:56...

  • Page 191: Cautions When Driving On The Farm Road

    Never slam on the brake especially when turning at high speed. When loading/unloading the machine  - Choose a place with a leveled and safe ground. - Drive at low speed. - Use a ramp with anti-slippery. 8 -  TX1500-영문-08(아).indd 5 2012-12-17 오후 2:28:56...

  • Page 192: Instruction After Use

    If it is inevitable to park on a slope, choke the wheels.  Park on a leveled and safe ground safely.  Check if the wiring code is in contact with other parts,  peeled, loose or having spacing. 8 - 6 TX1500-영문-08(아).indd 6 2012-12-17 오후 2:28:57...

  • Page 193: Tractor

    - If the safety frame was removed for specialized work, restore it immediately. Be careful to touch dangerous area such as power  transmission gear, rotating unit, etc. Put on a protec- tive cover. 8 -  TX1500-영문-08(아).indd 7 2012-12-17 오후 2:28:57...

  • Page 194: Rice Planting Machine

    If stopped due to foreign material stuck in transplant- necessary to replace the string of binding device.  ing arm , depress the key clutch pedal immediately, stop the engine and remove the foreign material. 8 - 8 TX1500-영문-08(아).indd 8 2012-12-17 오후 2:28:57...

  • Page 195: Other Requirements

    When manually threshing, be careful not to get your  draulic valve, hydraulic pump, carburetor. finger or sleeve to be twined with feed chain. Do not use a scythe to clean the threshing unit or cut-  ter while operating. 8 -  TX1500-영문-08(아).indd 9 2012-12-17 오후 2:28:57...
  • Page 196 MEMO TX1500-영문-08(아).indd 10 2012-12-17 오후 2:28:57...

  • Page 197: Appendix

    Appendix 1. MAjor specificAtion ......... 9-2 2. stAndArd pArts ..........9-4 3. MAjor consuMAbles ........9-5 TX1500-영문-09(자).indd 1 2012-12-17 오후 2:29:16...

  • Page 198: Major Specification

    Diesel fuel Fuel tank capacity Transmission type Number of speeds Continuous shifting Braking Hydraulic type Driving system Front axle Independent suspension Forward driving (Km/h) 0 ~40 Driving speed Reverse driving (Km/h) 0 ~30 9 -  TX1500-영문-09(자).indd 2 2012-12-17 오후 2:29:16...
  • Page 199 CAT 3 3-point Hitch Lift force (at 610 mm from hitch 5,300 point) Draft System Type Swing draw-bar ※ The specifications are subject to change for the purpose of improvement without notice. 9 - 3 TX1500-영문-09(자).indd 3 2012-12-17 오후 2:29:17...

  • Page 200: Standard Parts

    4 × 7 Grease pump 350cc Screwdriver (cross-head) 6 × 100 Screwdriver 6 × 100 사용설명서 User's manual Link pin Tool bag Wheel nut wrench () Hydraulic oil Cartridge element 993J001a Ball bushing 9 - 4 TX1500-영문-09(자).indd 4 2012-12-17 오후 2:29:17...

  • Page 201: Major Consumables

    Appendix Appendix 3. MAjor consuMAbles Primary Secondary Fuel oil filter TX1Oa01a TX1Oa02a TX1Oa03a Element Aircon belt Fan belt Hydraulic filter TX1Oa05a TX1O507a TX1Oa04a 9 - 5 TX1500-영문-09(자).indd 5 2012-12-17 오후 2:29:21...
  • Page 202 Engine oil Element set Air cleaner Fan belt Engine A/C belt Air conditioner Filter (suction) assembly Hydraulic oil Filter (return) assembly Hydraulic oil Hydraulic oil filter (high-pressure) Transmission fluid Line filter Transmission fluid 9 - 6 TX1500-영문-09(자).indd 6 2012-12-17 오후 2:29:21...

  • Page 203: Index

    INDEX 1. INDEX..............10-2 TX1500-영문-10(인덱스).indd 1 2012-12-17 오후 2:29:37...
  • Page 204 CheCkingeleCtroniChydrAuliCsysteM .....5-25 Positionsensor/ehr-B(BosCheCu) ....5-25  C heCkingengineCoolAnt...........5-4 CAutionsduringthework.........8-4 CheCkingfuelsysteMAndrePlACingfuelfilter..5-12  C Autionsfordrivinginto/outoffield....3-7 CheCkinghoses.............5-15  C AutionsfordrivingonroAd ........3-8 CheCkuPlistBeforeoPerAtion ........8-3 CAutionsforinsPeCtionAndMAintenAnCe ..8-6  C leAningoil-wAtersePArAtoroffuelfilter . ..5-12 CAutionswhendrivingonthefArMroAd....8-5  C leAningrAdiAtorAndCondensergrilles..5-4 TX1500-영문-10(인덱스).indd 2 2012-12-17 오후 2:29:37...
  • Page 205 ...........3-3 drivingsysteM ...............2-13 generAliMPleMent............4-2 generAlinforMAtion .............1-1 greAsingPoints............5-15 eleCtriCsysteM..............7-8 greAsing................5-15 engineCoolAnt...............3-8  e ngineidlinginColdCondition........3-3 engineidling ..............3-3  e ngineoilPressure............3-8 hAzArdflAsher...............2-3 enginestArting ...............3-2 howtostArtengine ............3-2 enginestoPPing..............3-3 hydrAuliCsysteM............7-7 TX1500-영문-10(인덱스).indd 3 2012-12-17 오후 2:29:37...
  • Page 206  o Peninghood..............5-2 ledBlinkingByerrorCode ........5-27  o PerAtingPrinCiPleofPreheAtingsysteM ..3-2  l iftrodAdjustMent(left/right) ......2-53  o PerAtingtiPsforPowersteeringwheel..2-51 loAder .................4-6 oPerAtionCheCkduringdriving ......3-8  l oAdingto/unloAdingfroMtruCk......3-7 oPerAtion ................3-1 long-terMstorAge............6-2 otherrequireMents.............8-9 lowerlink...............2-54  l owfuellevelwArninglAMP........3-8 TX1500-영문-10(인덱스).indd 4 2012-12-17 오후 2:29:37...
  • Page 207  r ePlACingtrAnsMissionhydrAuliCoilfilter . ..5-10  s toPPing................3-3   r ePlACingturnsignAllAMP/BrAke(stoP)lAMP . ..5-20 storAgeAnddisPosAl ..........6-1 riCePlAntingMAChine..........8-8  s uPPlyterMforserviCePArts....... 1-11 rotAvAtor................4-2 switChesAndinstruMentPAnel.......2-2 routineMAintenAnCesChedule ......5-22 routineMAintenAnCesChedule ......5-22 running-inPeriod............3-4 tiPsfordrivingonsloPe ..........3-7 tireinflAtionPressure..........5-21 TX1500-영문-10(인덱스).indd 5 2012-12-17 오후 2:29:37...
  • Page 208 INDEX toPlinkAdjustMent............2-53 towinghitCh ..............2-54 trACtorstorAge ............6-2 trACtor................8-7 trouBleshooting............7-1 turninginfield...............3-5 tyPesofworkBysPeedtABle........4-8 usAgeAnddisPosAl ............6-3  u seAfterlong-terMstorAge........6-3 useoftheMAChine............1-11 wArrAntyinforMAtion..........11-1 workProCedure............4-1 TX1500-영문-10(인덱스).indd 6 2012-12-17 오후 2:29:37...

  • Page 209: Warranty Information

    Warranty InformatIon 1. mEnDInG anD maIntaInInG tHE WarnInG DECaL ... 11-9 TX1500-영문-11(차).indd 1 2012-12-17 오후 2:29:55...
  • Page 210 TX1500-영문-11(차).indd 2 2012-12-17 오후 2:29:55...
  • Page 211 TX1500-영문-11(차).indd 3 2012-12-17 오후 2:29:56...
  • Page 212 TX1500-영문-11(차).indd 4 2012-12-17 오후 2:29:56...
  • Page 213 MEMO TX1500-영문-11(차).indd 5 2012-12-17 오후 2:29:56...
  • Page 214 MEMO TX1500-영문-11(차).indd 6 2012-12-17 오후 2:29:56...
  • Page 215 MEMO TX1500-영문-11(차).indd 7 2012-12-17 오후 2:29:56...
  • Page 216 Warranty InformatIon MEMO TX1500-영문-11(차).indd 8 2012-12-17 오후 2:29:56...

  • Page 217: Mending And Maintaining The Warning Decal

    When putting a new decal, wipe off the place to post the decal thoroughly and wait till it is dried. Then post the decal. Each decal has a part number on the bottom. When replacing a part attached with a decal with a new part, replace the decal as well. ■ TX1500-영문-11(차).indd 9 2012-12-17 오후 2:29:57...
  • Page 218 TX1500-영문-11(차).indd 10 2012-12-17 오후 2:29:57...

Table of Contents