TYM T194 User Manual
  1. Manuals
  2. Brands
  3. TYM Manuals
  4. Tractor
  5. T194
  6. User manual

TYM T194 User Manual

Hide thumbs Also See for T194:
Table of Contents

Advertisement

Quick Links

Thank you for purchasing our tractor. We are confident it will give you many years of reliable Service.
The introduction in this manual sets out the correct manner of operating, maintaining and checking the tractor
to ensure long-term durability.
Please ensure correct operation of the tractor as incorrect operation can cause substantial mechanical damage
as well as cause accidents with the associated injuries.
Please note that in some cases differences can exist between this manual and your tractor due to the manu-
facture's policy of constant product improvement.
In the event that you encounter a problem not covered by this manual please contact your nearest dealer
who will assist you in resolving your problem.
WARNING
T194-영문-01A(안).indd 1
FOReWORD
CALIFORNIA Proposition 65 Warning
The engine exhaust from this product contains chemicals known to
the state of California to cause cancer, birth defects or other repro-
ductive harm.
2017-02-13 오전 9:10:22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T194 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TYM T194

Summary of Contents for TYM T194

  • Page 1 CALIFORNIA Proposition 65 Warning The engine exhaust from this product contains chemicals known to the state of California to cause cancer, birth defects or other repro- ductive harm. WARNING T194-영문-01A(안).indd 1 2017-02-13 오전 9:10:22...
  • Page 2 All information, illustrations and specifications in this manual are based on latest information available at the time of publication. The right is reserved to make changes at any time without notice. T194-영문-01A(안).indd 2 2017-02-13 오전 9:10:22...
  • Page 3 SeRVICe Service is available from any TYM Carved position of the Engine type or Number dealer in the country. PARTS To obtain spare parts please contact your nearest dealer and give him the details listed below.
  • Page 4 Tong Yang Moolsan CO., LTD tor, do not hesitate to contact your (Here in after refer to TYM) tractor. Authorized TYM dealer/Distributor. He has trained personnel, genuine Your tractor has been designed and...
  • Page 5 The get in touch with the TYM Dealer/ tractor serial number is punched on Distributor in your locality. Dealer/ a plate attached to the left hand side T194-영문-01A(안).indd 5...
  • Page 6 Range and can be selected Speed AGeS The front wheel drive power is taken range by HIGH-LOW selector lever. TYM Tractors are fitted with Live (i.e. off the rear transmission and trans- The Tractor has Two pedals for for- system is in operation) independent, mitted to the differential in the front ward/reverse control .
  • Page 7 SAFeTY PReCAUTIONS 4. OWNeR ASSISTANCe ▶eLeCTRICAL SYSTeM We at TYM CO.,LTD and your TYM Your name, address and tele-  A 12 Volt Lead Acid Propylene Bat- Dealer/Distributor wants you to be phone number tery is used to activate the Engine...
  • Page 8 5. ROPS (ROLL OVeR PROTeCTIVe STRUCTUReS) ROLL OVeR PROTeCTIVe STRUCTUReS (ROPS) USe OF THe TRACTOR WITH THe ROPS LOWeReD CAN CAUSe FATAL INJURIeS TYM tractors are equipped with a DANGeR As the ROPS frame or cab together frame for the protection of opera- with the seat belt was designed to •...
  • Page 9 Do not put a hand between the  Always wear your seat belt if  seat and the slides when ad- the tractor is equipped with justing the seat position. You ROPS. can get injured unexpectedly. T194-영문-01A(안).indd 9 2017-02-13 오전 9:10:25...
  • Page 10 Carefully read the message. ty signs with signal Word "DANGER place if frayed or damaged. OR WARNING" are typically near specific hazards. General precau- tions are listed on CAUTION safety signs. - 10 T194-영문-01A(안).indd 10 2017-02-13 오전 9:10:25...
  • Page 11 100 hours of on the tractor, which may impair the tractor and every 500 hours there- function/safety and affect tractor life. - 11 T194-영문-01A(안).indd 11 2017-02-13 오전 9:10:25...
  • Page 12 Slow down before you make a sharp turn. Driving forward out of a ditch or mired condition could cause trac- tor to tip over backward. Back out of these situations if possible. - 12 T194-영문-01A(안).indd 12 2017-02-13 오전 9:10:25...
  • Page 13 PTO drive is Always keep your tractor clean of stopped before making adjustments, accumulated grease, and debris. Al- connections, or cleaning out PTO ways clean up spilled fuel. driven equipment. - 1 T194-영문-01A(안).indd 13 2017-02-13 오전 9:10:25...
  • Page 14 & night time, unless pro- rotating shafts. hibited by law. Always lower equipment to the ground. Stop the engine. Remove the key. Allow tractor to cool before any work repair is caused on it. - 1 T194-영문-01A(안).indd 14 2017-02-13 오전 9:10:25...
  • Page 15 2. Wear eye protection and acid proof hand gloves. 3. Avoid breathing direct fumes when electrolyte is added. 4. Do not add water to electrolyte as it may splash off causing severe burns. - 1 T194-영문-01A(안).indd 15 2017-02-13 오전 9:10:25...
  • Page 16 2. To ensure that there are no acci- dents from sparks you must first Remove rings and other jeweler to disconnect the negative battery prevent electrical shorts and entan- cable. glement in moving parts. - 1 T194-영문-01A(안).indd 16 2017-02-13 오전 9:10:25...
  • Page 17 CAUTION area remove the exhaust fumes by connecting exhaust pipe extension. • Safety Starter Switch is to be replaced after every 2,000 hours/4 years, whichever is earlier. - 1 T194-영문-01A(안).indd 17 2017-02-13 오전 9:10:26...
  • Page 18 Otherwise, it may lead to a fatal injury or even death. The possible safety exits are: • Rear window hatch (All tractors) • Front window (for versions with openable front window). - 1 T194-영문-01A(안).indd 18 2017-02-13 오전 9:10:26...
  • Page 19 Protective Structure). ry or even death. It never can protect the riders against falling objects. Avoid driving the vehicle into a dangerous area such as fall- ing rocks zone. - 1 T194-영문-01A(안).indd 19 2017-02-13 오전 9:10:26...
  • Page 20 The low during driving. Otherwise, it may bucket or boom can be accidental- lead to an injury or even death. ly dropped down, leading to an inju- ry or even death. - 20 T194-영문-01A(안).indd 20 2017-02-13 오전 9:10:27...
  • Page 21 When spraying or using chemicals, please ensure that clothing and pro- tective equipment is worn which pre- vents respiratory or skin problems. - 21 T194-영문-01A(안).indd 21 2017-02-13 오전 9:10:27...
  • Page 22 10. The cooling system operates un- and the parking brake applied der pressure, take care when re- and wheels choked. moving the radiator cap on a hot - 22 T194-영문-01A(안).indd 22 2017-02-13 오전 9:10:27...
  • Page 23 - 2 T194-영문-01A(안).indd 23 2017-02-13 오전 9:10:27...
  • Page 24 3. Do not remove ROPS (Roll Over ous to remove the cap while Protective Structure). Always use the system is hot. First turn the the seat belt. cap slowly to stop and allow the - 2 T194-영문-01A(안).indd 24 2017-02-13 오전 9:10:27...
  • Page 25 Do not bypass the moving the cap entirely. safety starter switch. Consult your 1. Before starting the tractor apply TYM tractor Dealer/Distributor if the parking brake, place the PTO 4. Do not smoke while the refueling safety- starting switch malfunctions.
  • Page 26 2. To avoid upsets, drive the tractor accidental detachment of imple- with care and at speeds compat- ment. ible with safety, especially when 13. Do not leave equipment/imple- operating over rough ground, ment in the raised position. - 2 T194-영문-01A(안).indd 26 2017-02-13 오전 9:10:27...
  • Page 27 7. Wipe up spilled fuel immediately. ways replace the PTO shield cap 8. Always tighten the fuel cap se- when the PTO is not in use. curely. - 2 T194-영문-01A(안).indd 27 2017-02-13 오전 9:10:27...
  • Page 28 DO - Allow the engine to cool before DO - Watch the oil pressure gauge removing the radiator filler cap or warning light and investi- and adding water, remove the gate any abnormality immedi- radiator cap slowly. ately. - 2 T194-영문-01A(안).indd 28 2017-02-13 오전 9:10:27...
  • Page 29 DON’T - Use the governor Control void. Lever (Hand throttle) while DON’T - Allow the engine to run driving on roads. idle for a long period. DON’T - Move the hydraulic levers rearward. - 2 T194-영문-01A(안).indd 29 2017-02-13 오전 9:10:27...
  • Page 30 MEMO T194-영문-01A(안).indd 30 2017-02-13 오전 9:10:27...
  • Page 31 INDEX GENERAL INFORMATION DESCRIPTION OF TRACTOR CONTROLS OPERATION WORK PROCEDURE MAINTENANCE STORAGE AND DISPOSAL TROUBLESHOOTING SAFETY STANDARD FOR FARM WORK APPENDIX INDEX WARRANTY DECAL INFORMATION T194-영문-01B(가).indd 1 2017-02-13 오전 8:53:40...

  • Page 32: Table Of Contents

    9. L OADING TO / UNLOADING FROM TRUCK... 3-6 1. TRACTOR STORAGE ........6-2 10. CAUTIONS FOR DRIVING ON ROAD ..3-7 2. USAGE AND DISPOSAL ........ 6-3 11. OPERATION CHECK DURING DRIVING ..3-7 T194-영문-01B(가).indd 2 2017-02-13 오전 8:53:40...
  • Page 33 4. CAUTIONS WHEN DRIVING ON THE FARM ROAD .. 8-5 5. INSTRUCTION AFTER USE ......8-6 6. CAUTIONS FOR INSPECTION AND MAINTENANCE ... 8-6 7. TRACTOR ............8-7 APPENDIX 1. MAjOR SPECIFICATIONS ......9-2 2. MAjOR CONSUMABLES ......9-4 T194-영문-01B(가).indd 3 2017-02-13 오전 8:53:40...

  • Page 34: T194-영문-01B(가).Indd

    MEMO T194-영문-01B(가).indd 4 2017-02-13 오전 8:53:40...

  • Page 35: General Information

    GENERAL INFORMATION 1. EXTRRIOR VIEW ............. 1-2 2. SAFETY SIGNS ............1-5 T194-영문-01B(가).indd 1 2017-02-13 오전 8:53:41...

  • Page 36: Extrrior View

    GENERAL INFORMATION 1. EXTRRIOR VIEW Turn signal lamp (R) Sub-fender Headlamp Tire (Rear) Tire (Front) T19O101A 1 - 2 T194-영문-01B(가).indd 2 2017-02-13 오전 8:53:41...
  • Page 37 GENERAL INFORMATION Steering Wheel Turn signal lamp (L) Hood Headlamp Muffler Pipe T19O102A 1 - 3 T194-영문-01B(가).indd 3 2017-02-13 오전 8:53:42...
  • Page 38 GENERAL INFORMATION Brake lamp Top link Turn signal lamp PTO safety cover Check link Lower link Towing hitch PTO shaft T39O202C T39O201D T19O136B 1 - 4 T194-영문-01B(가).indd 4 2017-02-13 오전 8:53:43...

  • Page 39: Safety Signs

    When putting a new decal, wipe off the place to post the decal thoroughly and wait till it is dried. Then post the decal. Each decal has a part number on the bottom. When replacing a part attached with a decal with a new part, replace the decal as ■ well. 1 - 5 T194-영문-01B(가).indd 5 2017-02-13 오전 8:53:43...
  • Page 40 GENERAL INFORMATION DANGER T19O104B 1 - 6 T194-영문-01B(가).indd 6 2017-02-13 오전 8:53:44...
  • Page 41 GENERAL INFORMATION PARKING BRAKE T19O105B 1 - 7 T194-영문-01B(가).indd 7 2017-02-13 오전 8:53:46...
  • Page 42 GENERAL INFORMATION T19O107C 1 - 8 T194-영문-01B(가).indd 8 2017-02-13 오전 8:53:47...

  • Page 43: Description Of Tractor

    DESCRIPTION OF TRACTOR CONTROLS 1. INSTRUMENT AND SWITCHES ......2-2 2. OPERATION THE CONTROLS ......2-12 3. OPERATING THE 3 POINT LINKAGE (TPL) ..2-24 T194-영문-02(나).indd 1 2017-02-13 오전 8:54:13...

  • Page 44: Instrument And Switches

    DESCRIPTION OF TRACTOR CONTROLS 1. INSTRUMENT AND SWITCHES Tachometer & speedometer Turn signal switch Light switch PTO ON/ OFF switch Main switch T39O301C 2 - 2 T194-영문-02(나).indd 2 2017-02-13 오전 8:54:14...
  • Page 45 When turning the switch to the OFF position with the engine running, the engine is stopped. "ON" position  The engine is kept running and the switch is energized in this position. 2 -  T194-영문-02(나).indd 3 2017-02-13 오전 8:54:14...
  • Page 46 Die- ☞ Ref to the page 7-4 for “Trouble- sel fuel. shooting” section. • Use fuel for winter season in winter to enhance engine start- ing performance. 2 -  T194-영문-02(나).indd 4 2017-02-13 오전 8:54:15...
  • Page 47 "ON" po- sition. 「OFF」 - All light OFF - Instrument lamp, tail lamp and low beam lamp ON. - Instrument lamp, tail lamp and high beam lamp ON. 2 -  T194-영문-02(나).indd 5 2017-02-13 오전 8:54:16...
  • Page 48 When pressing the cator on the instrument cluster blink. switch once, the left and right haz- ard warning lamps blink. Pressing the switch again turns off the lamps. 2 -  T194-영문-02(나).indd 6 2017-02-13 오전 8:54:16...
  • Page 49 Right turn signal indicator Low beam lamp PTO indicator Engine oil pressure warning lamp Charge warning lamp Engine warning Preheat indicator lamp Parking indicator Fuel level warning Water lamp temperature warning lamp T19O115B 2 -  T194-영문-02(나).indd 7 2017-02-13 오전 8:54:16...
  • Page 50 These lamps are operated when pressing the hazard warning lamp switch as well. PTO indicator (4) PTO indicator This comes on while the PTO shaft is rotating. 2 -  T194-영문-02(나).indd 8 2017-02-13 오전 8:54:16...
  • Page 51 Preheat indicator (6) Preheat indicator This comes on while the engine preheating function is activated. It goes off as soon as preheating is completed. 2 -  T194-영문-02(나).indd 9 2017-02-13 오전 8:54:16...
  • Page 52 PTO are in ON position. If the switch is pushed down and turn counter clock wise the indicator goes off signaling that the PTO is OFF. 2 - 10 T194-영문-02(나).indd 10 2017-02-13 오전 8:54:17...
  • Page 53 DESCRIPTION OF TRACTOR CONTROLS T19O117A PTO operation indicator  ON - The PTO shaft is rotating. OFF - The PTO shaft is stopped. 2 - 11 T194-영문-02(나).indd 11 2017-02-13 오전 8:54:17...

  • Page 54: Operation The Controls

    Joystick lever Driving speed control pedal Parking Brake Pedal Front wheel drive lever(4wd) Sub shift lever P.T.O Shift lever Position lever Power Socket PTO Switch Fuel Tank Cap T19O118C 2 - 12 2 - 12 T194-영문-02(나).indd 12 2017-02-13 오전 8:54:17...
  • Page 55 When releasing the speed control pedal, it is returned to the neutral position and the tractor is stopped. WARNING • Never use it unless working in a field. It can lead to speeding and an accident. 2 - 1 T194-영문-02(나).indd 13 2017-02-13 오전 8:54:18...
  • Page 56 2. To release the Parking brake, de- decrease the engine speed. press the brake pedals again. NOTE • The brake discs can be worn prematurely if driving the ve- hicle with the parking brake en- gaged partially. 2 - 1 T194-영문-02(나).indd 14 2017-02-13 오전 8:54:18...
  • Page 57 When the range shift lever is placed in the position "H," the Disengagement - Releasing pedal driving speed increased. There- fore, never put the range shift lever in the position "H" during driving backwards. 2 - 1 T194-영문-02(나).indd 15 2017-02-13 오전 8:54:19...
  • Page 58 OFF posi- going over a field bank. tion they are disengaged. Engage & disengage the front wheel drive with the front wheels in the straight position and at low speed. 2 - 1 T194-영문-02(나).indd 16 2017-02-13 오전 8:54:19...
  • Page 59 The seat can be adjusted by moving it forwards and backwards with the seat sliding lever on its front pushed to the left. After adjustment, make sure that the seat is firmly secured. 2 - 1 T194-영문-02(나).indd 17 2017-02-13 오전 8:54:19...
  • Page 60 WARNING • Make sure to wear your seat belt to protect yourself from a possible rollover or crash acci- T19O129B dent. • Never adjust the seat during driving. 2 - 1 T194-영문-02(나).indd 18 2017-02-13 오전 8:54:20...
  • Page 61 2. Make sure that PTO switch is OFF. T19O142B 3. Engage mid PTO using the PTO lever. 4. If rear PTO is needed to engage, shift the PTO lever to correct po- sition. 2 - 1 T194-영문-02(나).indd 19 2017-02-13 오전 8:54:21...
  • Page 62 It is dangerous to use an imple- ment at a high speed if it is de- signed to be operated at a low speed. • Before using an implement, make sure to read its owner's manual. 2 - 20 T194-영문-02(나).indd 20 2017-02-13 오전 8:54:21...
  • Page 63 Also, never der and bucket cylinder at the lease the steering wheel during turn the steering wheel com- same time. A loader may mal- driving. pletely continuously. function due to insufficient oil flow. 2 - 21 T194-영문-02(나).indd 21 2017-02-13 오전 8:54:22...
  • Page 64 Rotavator - Slow the lowering Pull the lever back to lift the im- speed. plement. • Plow - Speed up the lowering 「Lowering implement」 speed. Push the lever forward to lower the implement. 2 - 22 T194-영문-02(나).indd 22 2017-02-13 오전 8:54:22...
  • Page 65 When servicing the implement • Decreasing lowering speed Turn the knob clockwise (slower). • Increasing lowering speed Turn the knob counterclockwise (faster). • Lock Turn the knob clockwise (slower) to its end. 2 - 2 T194-영문-02(나).indd 23 2017-02-13 오전 8:54:22...

  • Page 66: Operating The 3 Point Linkage (Tpl)

    DESCRIPTION OF TRACTOR CONTROLS 3. OPERATING THE 3 POINT LINKAGE (TPL) Brake lamp Top link Turn signal lamp PTO Safety Cover Lift rod Lower link Towing hitch Check link Rear PTO Shaft T19O144A 2 - 2 T194-영문-02(나).indd 24 2017-02-13 오전 8:54:23...
  • Page 67 W h e n n o i m p l e m e n t i s a t - tached, fix the lower links with the left and right check links so that they do not touch the rear wheels. • Engage the top link with the hook. 2 - 2 T194-영문-02(나).indd 25 2017-02-13 오전 8:54:23...
  • Page 68 PTO shaft, remove the towing hitch from the tractor. Otherwise, the uni- versal joint hits and damages the towing hitch, leading to an accident. 2 - 2 T194-영문-02(나).indd 26 2017-02-13 오전 8:54:23...

  • Page 69: Operation

    8. CAuTIONs fOR dRIvINg INTO / OuT Of fIEld .. 3-6 9. lOAdINg TO / uNlOAdINg fROm TRuCk ..3-6 10. CAuTIONs fOR dRIvINg ON ROAd ....3-7 11. OPERATION ChECk duRINg dRIvINg ....3-7 T194-영문-03(다).indd 1 2017-01-05 오후 7:03:13...

  • Page 70: Engine Starting

    ⑥ Tu r n t h e m a i n s w i t c h t o t h e gine on the driver's seat. "START" position. When the engine is started, release the switch. ⑦ Confirm that all monitoring lamps go off after the engine is started. 3 -  T194-영문-03(다).indd 2 2017-01-05 오후 7:03:15...

  • Page 71: Engine Stopping

    If the engine has been running ly ventilated area. It can cause for an extended period of time, carbon monoxide poisoning by stop the engine only after idling emissions. it for 5 to 10 minutes. 3 - 3 T194-영문-03(다).indd 3 2017-01-05 오후 7:03:16...

  • Page 72: Running-In Period

    H. The driving ④ Apply the parking brake. speed becomes faster and it can cause an accident. ⑤ If an implement is attached to the vehicle, lower it. 3 -  T194-영문-03(다).indd 4 2017-01-05 오후 7:03:16...

  • Page 73: Driving On Slope

    (2) Keep the driving speed low on a downhill road. 3 - 5 T194-영문-03(다).indd 5 2017-01-05 오후 7:03:17...

  • Page 74: Cautions For Driving Into / Out Of Field

    (2) Be extra careful when using ramps. (3) If the engine stops on ramps, depress the brake pedals immediately and release them slowly to move onto the ground. Then, start the engine again to climb the ramps again. 3 - 6 T194-영문-03(다).indd 6 2017-01-05 오후 7:03:17...

  • Page 75: Cautions For Driving On Road

    Make sure to take an appropri- workshop. and vehicle may not be steered ate action immediately. properly. 3 -  T194-영문-03(다).indd 7 2017-01-05 오후 7:03:19...
  • Page 76 OPERATION MEMO T194-영문-03(다).indd 8 2017-01-05 오후 7:03:19...

  • Page 77: Work Procedure

    Work Procedure 1. Precautions for handling imPlement ..4-2 2. general imPlement ........... 4-2 T194-영문-04(라).indd 1 2016-12-16 오전 8:42:40...

  • Page 78: Precautions For Handling Implement

    For the universal joint, its inner hitch only. shaft and outer shaft should be overlapped at least 15 cm. • Check that the universal joint is firmly fixed to the tractor and ro- tavator shaft. 4 -  T194-영문-04(라).indd 2 2016-12-16 오전 8:42:41...
  • Page 79 A: Border from (7) to (18). • When driving forward to plow, have the bank on the right side. • Be careful not to press already- 995E001A plowed soil with the wheels. 4 - 3 T194-영문-04(라).indd 3 2016-12-16 오전 8:42:42...
  • Page 80 For the sections (8) to (19), plow in a circular pattern. (18) • A: Border (14) Refer to the sequential returning (10) pattern for other details. 995E00A 4 - 4 T194-영문-04(라).indd 4 2016-12-16 오전 8:42:43...
  • Page 81 The border shown in the fig- Start ure should be set a little narrow- er than two times of one plowing A: Border (1) width. • Refer to the alternating returning pattern for other details. 995E003A 4 - 5 T194-영문-04(라).indd 5 2016-12-16 오전 8:42:44...
  • Page 82 MEMO T194-영문-04(라).indd 6 2016-12-16 오전 8:42:44...

  • Page 83: Maintenance

    7. checking and cleaning air cleaner ..5-13 8. greasing ............. 5-14 9. checking hOses ..........5-14 10. checking electric systeM ......5-15 11. check and adjust each part ....5-19 12. rOutine Maintenance schedule ....5-22 T194-영문-05(마).indd 1 2017-02-13 오전 9:20:23...

  • Page 84: Opening Covers

    - Lamps for proper illumina- tion and damage - Tires for inflation pressure, crack, damage and wear - Rotating parts for loose bolts and nuts - Transmission fluid level - Implement attachment sta- 5 -  T194-영문-05(마).indd 2 2017-02-13 오전 9:20:24...
  • Page 85 - E n g i n e o i l a n d c h a r g e warning lamps for blinking operation - Turn signal lamp - Horn operation - Brake pedal free play 5 -  T194-영문-05(마).indd 3 2017-02-13 오전 9:20:24...

  • Page 86: Inspecting And Changing Coolant

    ④ Start and idle the engine for ap- steam can burn you seriously. prox. 5 minutes. Then, check Wait until the engine is suffi- coolant in the reservoir tank and ciently cooled down. add more coolant as necessary. 5 -  T194-영문-05(마).indd 4 2017-02-13 오전 9:20:25...
  • Page 87 In this case, clean the grille. If dust is stuck between the fan and tube, flush the area with clean water. NOTE • Do not clean the radiator fin with water jet. It can deform the fin. 5 - 5 T194-영문-05(마).indd 5 2017-02-13 오전 9:20:25...

  • Page 88: Checking And Changing Oil

    Lower limit burnt. T254O508A After draining oil, tighten the en-  gine oil drain plug. Add the specified amount of the  specified engine oil through the filler hole. 5 -  T194-영문-05(마).indd 6 2017-02-13 오전 9:20:26...
  • Page 89 ① Check the transmission fluid lev- right after the engine is stopped. el through the sight glass to see if the level is between the upper and lower limits. ② If insufficient, add oil. 5 -  T194-영문-05(마).indd 7 2017-02-13 오전 9:20:26...
  • Page 90 Make sure to clean your skin with soap and water or hand cleaner thoroughly. 5 -  T194-영문-05(마).indd 8 2017-02-13 오전 9:20:26...

  • Page 91: Front Axle Oil

    5 minutes after the engine is stopped. T254O514A • When trying to use new oil from a different manufacturer or oil with different viscosity, drain used oil completely before add- ing new oil. 5 -  T194-영문-05(마).indd 9 2017-02-13 오전 9:20:27...

  • Page 92: Replacing Filter And Cartridge

    / turns further with a wrench. ④ Add hydraulic oil to the specified level. ⑤ Check the oil level with the dipstick again. If still insufficient, add more. 5 - 10 T194-영문-05(마).indd 10 2017-02-13 오전 9:20:27...
  • Page 93 When its packing touches the sealing surface, turn it approx. 2/3 turns further with a wrench. ③ Add engine oil to the specified level. 5 - 11 T194-영문-05(마).indd 11 2017-02-13 오전 9:20:28...

  • Page 94: Fuel System

    ③ When clean fuel flows out of the bleeding screw, tighten the screw. jection pump. Make sure to add quality fuel through the strainer. ④ Repeat the procedure if the system is not bled completely. 5 - 1 T194-영문-05(마).indd 12 2017-02-13 오전 9:20:28...

  • Page 95: Checking And Cleaning Air Cleaner

    If it firmly. is dirty or watery, wipe it with a • Tighten each part of the air dry rag thoroughly before fitting it cleaner securely to block dust again. completely. 5 - 1 T194-영문-05(마).indd 13 2017-02-13 오전 9:20:28...

  • Page 96: Greasing

    Make sure to check the fuel the grease nipple. hose and take a necessary ac- Add grease with the supplied grease tion. gun. 5 - 1 T194-영문-05(마).indd 14 2017-02-13 오전 9:20:28...

  • Page 97: Checking Electric System

    Be careful not to ② If the battery terminal is corroded, spill any. it cannot deliver current. If it is corroded or contaminated, wipe it with sandpaper or a brush. battery specificatiOn 1V 5AH (0HR) 5 - 15 T194-영문-05(마).indd 15 2017-02-13 오전 9:20:29...
  • Page 98 ⑤ When using a charger, its charg- ing current should be below 10 A. 5 - 1 T194-영문-05(마).indd 16 2017-02-13 오전 9:20:29...
  • Page 99 (1) body fuse box Fuses are installed in this tractor to prevent any possible accident in case of wiring circuit malfunction. If the electric system is malfunction- ing during driving, check for any blown fuse. 5 - 1 T194-영문-05(마).indd 17 2017-02-13 오전 9:20:29...
  • Page 100 1V 1W (Left) protect wirings. Find the cause for Turn signal lamp 1V 1W blown fuses and replace them with (Right) the specified genuine parts. Position lamp 1V 5W 5 - 1 T194-영문-05(마).indd 18 2017-02-13 오전 9:20:30...

  • Page 101: Check And Adjust Each Part

    ② Check the belt's tension. Press the middle of the belt with  ~  kg of force. It is okay when the belt is deflect- ed for  ~  mm. 5 - 1 T194-영문-05(마).indd 19 2017-02-13 오전 9:20:30...
  • Page 102 Replace it if nec- damaged or leaks. Replace it if damaged or leaks. Replace it if necessary. essary. necessary. ③ Tighten the clamp. ③ Tighten the clamp. ③ Tighten the clamp. 5 - 0 T194-영문-05(마).indd 20 2017-02-13 오전 9:20:31...

  • Page 103: Tire Inflation Pressure

    TURF F 1X.50- Turf Rear TURF R 24x12.00-12 WARNING • Make sure to keep the specified inflation pressure of the tires to avoid an accident or even death due to tire's rupture. 5 - 1 T194-영문-05(마).indd 21 2017-02-13 오전 9:20:31...

  • Page 104: Routine Maintenance Schedule

    Check and replenish every 50 hours and replace as necessary 5-15 Radiator and air cleaner Hoses Replace ○ ○ hoses and bands every  years Checking fuel hose Hoses Replace ○ ○ and band every  years 5 -  T194-영문-05(마).indd 22 2017-02-13 오전 9:20:31...
  • Page 105 Tightness of front / Check frequently before driving rear wheels Adjusting throttle ○ ○ system Rubber hoses ○ ○ Checking electric Every year ○ ○ ○ ○ wiring Hydraulic hoses & ○ pipes 5 -  T194-영문-05(마).indd 23 2017-02-13 오전 9:20:31...
  • Page 106 .(5) Grease nipple Engine oil filler hole Transmission fluid oil filler Engine oil Drain Front axle hole oil filler hole T19O523A Filler hole ● Grease nipple ▲ Drain hole ■ Check hole 5 -  T194-영문-05(마).indd 24 2017-02-13 오전 9:20:32...

  • Page 107: Storage And Disposal

    Storage and diSpoSal 1. tractor Storage ..........6-2 2. USage and diSpoSal ...........6-3 T194-영문-06(바).indd 1 2017-01-04 오후 6:42:09...

  • Page 108: Tractor Storage

    (5) Check each bolt and nut for ing. looseness and tighten any loose (7) Remove the key and store it bolt and nut. separately. (6) Set the tire inflation pressure a little higher than the specifica- tion. 6 -  T194-영문-06(바).indd 2 2017-01-04 오후 6:42:09...

  • Page 109: Usage And Disposal

    If leaving the battery connected to machine according to the laws. the tractor, turn off its switch to cut electric power. • If wiring is damaged by rodents, its short circuit can start a fire. 6 -  T194-영문-06(바).indd 3 2017-01-04 오후 6:42:12...
  • Page 110 Storage and diSpoSal MEMO T194-영문-06(바).indd 4 2017-01-04 오후 6:42:12...

  • Page 111: Troubleshooting

    TROUBLESHOOTING 1. ENGINE SYSTEM ............. 7-2 2. BRakE SYSTEM ............7-6 3. STEERING SYSTEM ..........7-6 4. HYdRaULIc SYSTEM ..........7-7 5. ELEcTRIc SYSTEM ..........7-8 76 4 3 7 T194-영문-07(사).indd 1 2017-01-05 오후 7:04:19...

  • Page 112: Engine System

    Defective key stop unit Have it repaired by workshop • • Air in fuel system Bleed the system The engine runs irregularly • Clogged fuel filter • Clean or replace the filter 7 -  T194-영문-07(사).indd 2 2017-01-05 오후 7:04:19...
  • Page 113 Insufficient coolant amount Add coolant • • Damaged fan belt Replace the belt The engine is over- heated • • Clogged radiator Clean the radiator • • Insufficient engine oil Check and add 7 -  T194-영문-07(사).indd 3 2017-01-05 오후 7:04:19...
  • Page 114 Add to the specified level The oil warning lamp • • Low viscosity of engine oil Change engine oil with proper viscosity comes on during driving • • Faulty pressure switch Replace the switch 7 -  T194-영문-07(사).indd 4 2017-01-05 오후 7:04:20...
  • Page 115 • • Defective alternator Have it repaired by workshop driving • • Defective battery Replace the battery • • Damaged fan belt Replace the belt 76 4 3 7 7 -  T194-영문-07(사).indd 5 2017-01-05 오후 7:04:20...

  • Page 116: Brake System

    Have it repaired by workshop The free movement of • • the steering wheel is Worn metal parts Have it repaired by workshop excessive • • Free play from each connection Tighten 7 -  T194-영문-07(사).indd 6 2017-01-05 오후 7:04:20...

  • Page 117: Hydraulic System

    Clean won't be increased • • Defective hydraulic pump Have it repaired by workshop • • Defective valve Have it repaired by workshop • • Damaged cylinder Have it repaired by workshop 7 - 7 T194-영문-07(사).indd 7 2017-01-05 오후 7:04:20...

  • Page 118: Electric System

    Contact failure • Check and clean the ground and terminal • • Defective horn switch Replace • • The horn does not operate Defective wiring Repair • • Damaged horn Repair or replace 7 -  T194-영문-07(사).indd 8 2017-01-05 오후 7:04:20...
  • Page 119 Check and clean the ground and terminal • • Blown bulb Replace the bulb The work lamp does not come on • • Contact failure Check and clean the ground and terminal 76 4 3 7 7 -  T194-영문-07(사).indd 9 2017-01-05 오후 7:04:21...
  • Page 120 TROUBLESHOOTING MEMO T194-영문-07(사).indd 10 2017-01-05 오후 7:04:21...

  • Page 121: Safety Standard For Farm Work

    4. cautIonS when drIvIng on the farm road ..8-5 5. InStructIon after uSe ........8-6 6. cautIonS for InSpectIon and maIntenance ... 8-6 76 4 3 8 7. tractor ..............8-7 아 -  T194-영문-08(아).indd 1 2017-01-05 오후 7:04:53...

  • Page 122: Instruction Before Use

    - Measures against dust and toxic gas. - Wear an appropriate protective gear. - Measures against the herbicide – wear protective gear to protect respiratory system, eyes and skin. 8 -  T194-영문-08(아).indd 2 2017-01-05 오후 7:04:53...

  • Page 123: Checkup List Before Operation

    When getting on and off a truck, have a helper give  you signal and follow his/her lead. Refer to chapter  in user’s manual regarding the decals  on the machine. 8 -  T194-영문-08(아).indd 3 2017-01-05 오후 7:04:53...

  • Page 124: Cautions During The Work

    - Do not jump on/off the operating machine except for emergency. Do neither stay nor insert foot under the working units.  Be cautious not to let anyone touch the belt . Always  check the connected area of belt. 8 -  T194-영문-08(아).indd 4 2017-01-05 오후 7:04:53...

  • Page 125: Cautions When Driving On The Farm Road

    76 4 3 9 76 4 3 8 When loading/unloading the machine  - Choose a place with a leveled and safe ground. - Drive at low speed. - Use a ramp with anti-slippery. 8 -  T194-영문-08(아).indd 5 2017-01-05 오후 7:04:54...

  • Page 126: Instruction After Use

    If it is inevitable to park on a slope, choke the wheels.  Park on a leveled and safe ground safely.  Check if the wiring code is in contact with other parts,  peeled, loose or having spacing. 8 - 6 T194-영문-08(아).indd 6 2017-01-05 오후 7:04:54...

  • Page 127: Tractor

    - If the safety frame was removed for specialized work, restore it immediately. Be careful to touch dangerous area such as power  transmission gear, rotating unit, etc. Put on a protec- tive cover. 8 -  T194-영문-08(아).indd 7 2017-01-05 오후 7:04:54...
  • Page 128 MEMO T194-영문-08(아).indd 8 2017-01-05 오후 7:04:54...

  • Page 129: Appendix

    Appendix 1. MAjor specificAtions ........9-2 2. MAjor consuMAbles ........9-4 T194-영문-09(자).indd 1 2017-01-05 오후 6:57:49...

  • Page 130: Major Specifications

    PTO Control Electric/Hydro Number of Speeds  Range PTO Mid-Option [rpm] ,500 Max Travelling Speed, 7.8 [1.5] PTO rear [rpm] mph[km/h] PTO Shaft Diameter Brakes Wet Disc 1 3/8 [35] in.[mm] Steering Hydrostatic 9 -  T194-영문-09(자).indd 2 2017-01-05 오후 6:57:50...
  • Page 131 44.5 [1,130] Wheelbase, in [mm] 53.1 [1,350] Height to top of ROPS, 86.6 [,00] in. [mm] Min. Ground Cleareance, F/A 8.3 [10] in. [mm] Min. Turn Radius, w/o brakes 86.6 [,00] in [mm] 9 - 3 T194-영문-09(자).indd 3 2017-01-05 오후 6:57:50...

  • Page 132: Major Consumables

    Element assembly Air cleaner V-belt Engine fan belt Main Fuel filter Fuel filter Pre Fuel filter Fuel Filter Engine oil filter Engine oil filter Filter cartridge Transmission hydraulic oil Strainer Transmission element 9 - 4 T194-영문-09(자).indd 4 2017-01-05 오후 6:57:52...

  • Page 133: Index

    INDEX 1. INDEX............10-2 T194-영문-10-인덱스.indd 1 2017-02-13 오전 8:54:41...
  • Page 134 SyStem ..............7-8 cHecKing And cHAnging engine Oil ......5-6 engine cOOlAnt ...............3-7 cHecKing And cHAnging frOnt Axle Oil ....5-9 engine cOOlAnt inSpectiOn And cHAnge ....5-4 cHecKing And cHAnging Oil .........5-6 engine idling ..............3-3 10 -  T194-영문-10-인덱스.indd 2 2017-02-13 오전 8:54:41...
  • Page 135 ...........3-3 generAl implement............4- jump StArt ...............5-16 generAl infOrmAtiOn .............1-1 greASing................5-14 greASing BrAKe Arm ...........5-14 lOAding tO / unlOAding frOm trucK ......3-6 greASing pOintS ............5-14 lOng-term StOrAge ............6- lOwer linK ...............-5 10 - 3 T194-영문-10-인덱스.indd 3 2017-02-13 오전 8:54:41...
  • Page 136 StArting Off, SHifting And driving ......3-4 ptO ..................-18 Steering SyStem .............7-6 ptO On/Off SwitcH ............-10 StOpping ................3-3 ptO SHAft cAp ..............-0 StOpping And pArKing ............3-4 StOrAge And diSpOSAl ...........6-1 SuB SHift lever ..............-14 10 - 4 T194-영문-10-인덱스.indd 4 2017-02-13 오전 8:54:41...
  • Page 137 HitcH ..............-6 trActOr ................8-7 trActOr StOrAge ............6- trAnSmiSSiOn StrAiner cleAning ......5-10 trOuBleSHOOting ............7-1 uSAge And diSpOSAl ............6-3 uSe After lOng-term StOrAge ........6-3 vAcuum vAlve cleAning ..........5-13 wArrAnty ................. 11-1 wOrK prOcedure ............4-1 10 - 5 T194-영문-10-인덱스.indd 5 2017-02-13 오전 8:54:41...
  • Page 138 T194-영문-10-인덱스.indd 6 2017-02-13 오전 8:54:41...

  • Page 139: Warranty

    WARRANTY WARRANTY PDI CheCklIsT T194-영문-11-보증서.indd 1 2017-02-13 오전 8:43:52...
  • Page 140 (000) engine operation hours, whichever occurs first. An extended limited warranty of thirty-six () months or three thousand (000) engine operating hours, whichever occurs first, is provided for these specific parts only: the cylinder block, cylinder head, crankshaft forging, connecting rods, flywheel, flywheel housing, camshaft, 11 -  T194-영문-11-보증서.indd 2 2017-02-13 오전 8:43:52...
  • Page 141 In no event shall YANMAR or any authorized industrial engine dealer or distributor be liable for incidental, special or consequential damages. Such consequential damages may include, but not be limited to, loss of revenue, loan payments, cost of rental of substitute equipment, insurance coverage, storage, lodging, 11 -  T194-영문-11-보증서.indd 3 2017-02-13 오전 8:43:52...
  • Page 142 YANMAR, either orally or in writing. Questions: If you have any questions or concerns regarding this warranty, please call or write to the nearest authorized YANMAR industrial engine dealer or distributor or other authorized facility. 11 -  T194-영문-11-보증서.indd 4 2017-02-13 오전 8:43:52...
  • Page 143 Where a warrantable condition exists, YANMAR will repair your off-road compression-ignition engine at no charge to you including diagnosis, parts and labor. 11 -  T194-영문-11-보증서.indd 5 2017-02-13 오전 8:43:52...
  • Page 144 Variable speed In the absence of a device to measure the hours or constant kW ≥  Any speed of use, the engine has a warranty period of five () speed years. 11 -  T194-영문-11-보증서.indd 6 2017-02-13 오전 8:43:53...
  • Page 145 YANMAR to the original retail purchaser. Such components may include the following: (A) Fuel injection system (including Altitude compensation system) (B) Cold start enrichment system (C) Intake manifold and Air intake throttle valve 11 -  T194-영문-11-보증서.indd 7 2017-02-13 오전 8:43:53...
  • Page 146 YANMAR disclaims any responsibility for incidental or consequential such as loss of time, inconvenience, loss of use of equipment/engine or commercial loss. 11 -  T194-영문-11-보증서.indd 8 2017-02-13 오전 8:43:53...
  • Page 147 If you have any questions regarding your warranty rights and responsibilities, or would like information on the nearest YANMAR dealer or authorized service center, you should contact YANMAR America Corporation. Website: www.yanmar.com E-mail: CS_support@yanmar.com Toll free telephone number: 1-00--, 1--1-01 11 -  T194-영문-11-보증서.indd 9 2017-02-13 오전 8:43:53...
  • Page 148 Exceeding the limitations will affect the operation of an engine and its certified configuration. Refer to the installation requirements and limitations of the TNV series Application Manual for the engine being equipped with these systems. 11 - 10 T194-영문-11-보증서.indd 10 2017-02-13 오전 8:43:53...
  • Page 149 An example of an approved connection would be internally threaded with standard pipe threads of a size not larger than one-half inch, and shall be closed by a pipe-plug when not in use. 11 - 11 T194-영문-11-보증서.indd 11 2017-02-13 오전 8:43:53...
  • Page 150 For equipment manufacturers who prepare their own warranty cards, owner's manuals, service manuals, operation manuals and any related documents; they must reference the emission-related service intervals and procedures indicated in YANMAR's technical documents: Warranty Statement, Operation Manual, Service Manual and Application Manual. 11 - 1 T194-영문-11-보증서.indd 12 2017-02-13 오전 8:43:53...
  • Page 151 This Limited warranty is limited to TYM repairing or replacing, at TYM's option, warranted parts by an authorized TYM dealer at no charge for either the parts or services. Parts replaced under this Limited Warranty are only warranted for the balance of the warranty period.
  • Page 152 2. Options, accessories, attachments installed by Dealers which are not manufactured by TYM will not be warranted in any way by TYM. For information about the warranty or to obtain warranty service on such parts, Dealers should contact the manufacturer directly 3.
  • Page 153 Additional Tools 1. Availability of user’s manual, Warning Decal 1. Status in the attached location tools, and parts It is confirmed that there is nothing wrong with the product before delivery. Year Month Inspector: (Signature) T194-영문-11-보증서.indd 15 2017-02-13 오전 8:43:55...

Table of Contents

Save PDF