Replacing The Batteries - Ryobi RM480e Original Instructions Manual

Ride-on mower
Hide thumbs Also See for RM480e:
Table of Contents

Advertisement

BOTTOM EDGE
JAM NUT
ADJUSTMENT
NUTS
JAM NUT

REPLACING THE BATTERIES

See fig. 31 - 34
NOTE: Use only RYOBI ride-on mower lead-
acid batteries, part number 099749014036.
The mower operates on four 12-volt batteries
connected in series. If replacing one or more
of the batteries, always replace them using
batteries of the same type with equal voltage
and capacity.
Do not open or damage the batteries.
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be
toxic if swallowed.
Do not incinerate the battery. The batteries
could explode. Check with local codes for
BLADE
possible special disposal instructions.
When batteries are not in use, keep it away
from other metal objects, like paper clips,
Fig 29
coins, keys, nails, screws, or other small
metal objects, that can make a connection
from one terminal to another. Shorting the
battery pack terminals together may cause
sparks, burns, fire or explosion.
Exercise care in handling batteries in order
not to short the battery with conducting
materials, such as rings, bracelets, and
keys. The battery or conductor may
overheat and cause burns.
Use only original lead-acid batteries when
replacing.
Never mix different makes and sizes
of batteries in the series. Doing so will
eventually cause damage to the batteries
Fig 30
and may also damage the mower.
1.
Stop the product on a level surface, and
engage the parking brake.
2.
Turn off the product, and remove the start
key.
3.
Raise the mower seat.
4.
Press the tabs on the wiring cover. Lift the
cover and turn it to one side to access the
compartment below.
5.
Remove and set aside the hex head bolt
that secures the battery tray in place.
6.
Disconnect the battery quick-connect
plug. The plug connects the batteries to
the mower.
7.
Remove the four screws that secure the
battery compartment cover in place.
8.
Remove the two flange nuts and flange
bolts that secure the front of the battery
tray in place.
9.
Fully extend the battery tray, resting
the end outside the mower on a stable
surface that can support a minimum
weight of 136.1 kg. (300 lb.).
WARNING
WARNING
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents