Step 3: Place Pads On The Patient - Cardiac Science POWERHEART AED G3 9300A Quick Reference Manual

Step 3: Place pads

Step 3: Place pads on the patient

1.
2.
3.
When the AED
prompts...
"Tear open package Keeping the pads connected to the AED, tear open the package.
and remove pads. "
"Peel one pad from
the plastic liner. "
"Place one pad on
bare upper chest. "
"Peel second pad
and place on bare
lower chest as
shown. "
Note: Cardiac Science's standard defibrillation pads are non-
polarized and can be placed in either position as shown on the pad
package.
Powerheart® AED G3 9300A and 9300E
Remove clothing from the patient's chest.
Ensure that the patient's skin is clean and dry.
Dry the patient's chest and shave excessive hair if necessary.
Do this ...
Remove the pads from the package.
Leave the package attached to the pad wires.
With a firm, steady pull, peel one pad
away from the blue plastic liner.
It does not matter which pad to use
Note: Do not pull on the lead wires.
Place the pad without the liner on the
bare upper chest as shown on the
package..
1. Pull the blue liner from the second
pad.
Note: Do not pull on the lead wires.
2. Place pad on the bare lower
chest as shown on the package.
70-02006-01 A
3-5