Before Using For The First Time; Making Coffee - TEFAL CM330 Series Instructions Manual

• This appliance is intended to be used only in the household.
It is not intended to be used in the following applications, and the guarantee will not apply for:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.

Before using for the first time

• Place your coffee maker on a flat, stable, heat-resistant surface away from water splashes and
any sources of heat.
• Run the coffee maker for the first time without coffee, rinsing the circuit with 0.5 litres of
water.

Making coffee

(Follow illustrations 1 to 6)
• Plug the coffee maker into a mains socket with the same voltage as that indicated on the rating
plate of the appliance.
• Fill the water tank with cold water.
• Never exceed the maximum amount of water shown by the tank graduations.
• The marks on the tank show the volume of water required for the number of cups desired.
• Fit a coffee filter (filter paper n°4 or permanent filter) into the filter holder. Add one
tablespoonful of ground coffee for each cup. If you prefer your coffee slightly stronger or weaker,
adjust the quantity of coffee to suit your taste.
• Fit the filter holder onto its support and close the lid.
• Place the jug onto the hot plate.
• Switch on. The "ON" indicator light shows that the machine is operating.
• If you want to serve a cup of coffee before the end of the cycle, simply remove the jug from
the hot plate. The coffee will stop flowing automatically. Return the jug to the plate quickly so
that the coffee may continue flowing.
• At the end of a cycle, wait for around one minute until the water in the filter stops flowing into
the jug. We recommend leaving the lid on the jug so that it is easier to use and so that the
coffee stays at the right temperature for longer.
• To keep the coffee hot, place the jug on the hot plate after serving the coffee. The hot plate
automatically stays at the ideal temperature as long as the coffee machine is switched on.
• Switch off when the jug is empty or when the appliance is not in use.
• If you want to prepare another coffee cycle, switch off the appliance and wait for 10 minutes
so that the heating elements can cool down.
Important : if you do not let the appliance cool down before preparing another coffee cycle, the
water in the tank may become too hot and a jet of steam may come out, causing burns.
5
EN