Troubleshooting; Common Problems - Beko BIMPO 181 User Manual

4

Troubleshooting

Warning:
A
If one of the following conditions occurs, switch off the
power supply immediately and contact your dealer for
further assistance.
• T he operation light continues to flash rapidly after the unit has been restarted.
• T he remote control buttons do not work.
• T he unit continually trips fuses or circuit breakers.
• A foreign object or water enters the air conditioner.
• O ther abnormal situations.

4.1 Common problems

The following symptoms are not a malfunction and in most situations will not require repairs.
Problem
Unit does not turn on
when pressing On/Off
button
The unit changes from
cool mode to fan mode
The indoor unit emits
white mist
Both the indoor and
outdoor units emit
white mist
20 / 84 EN
The unit has a 3-minute protection feature that prevents the unit from
overloading. The unit cannot be restarted within three minutes of
being turned off.
Cooling and heating models: If the operation light and PRE-DEF (Pre-
heating/Defrost) indicators are lit up, the outdoor temperature is too
cold and the unit's anti-cold wind is activated in order to defrost the
unit.
In Cooling-only models: If the "fan only" indicator is lit up, the outdoor
temperature is too cold and the unit's anti-freeze protection is
activated in order to defrost the unit.
The unit changes its setting to prevent frost from forming on the unit.
Once the temperature increases, the unit will start operating again.
The set temperature has been reached, at which point the unit
turns off the compressor. The unit will resume operating when the
temperature fluctuates again.
In humid regions, a large temperature difference between the room's
air and the conditioned air can cause white mist.
When the unit restarts in heat mode after defrosting, white mist may
be emitted due to moisture generated from the defrosting process.
Free match split type air conditioner / User Manual
Possible causes