Table of Contents
Advertisement
7.4
Table showing signal mode relationships
The table shows the function of each signal, depending on the selected mode.
Code 2 (E7)
digit 1
Signal 1
Signal 2
Signal 3
The configuration for the Flow Transmitter should adhere to the following example when
utilising the 3-phased output mode. This configuration is the same for all sizes of the Flow
Transmitter:
The Code2 variable (PD 210 display key E7 ) must be set to
have the mode values: 6, 7 and 8.
The * indicates that these digits should be configured according to the actual application
and working conditions for the Flow Transmitter.
Manual
Mode 1
Mode 2
simple
2-phase
6
7
Phase 1
Error
Up/down
Phase 1
Error
Phase 2
Flow Transmitter, PD 340
Mode 3
Terminal
3-phase
number
8
Phase 1
3
Phase 2
16
Phase 3
18
X * 8 * * 0 0 0, where X can
502 010 05
41/55
Advertisement
Table of Contents
