Table of Contents
Advertisement
502 010 05
3.3
Flowmeter-Display, PD 4000/340
The Flowmeter-Display is based on a PD 4000 P-NET Controller and is designed to display
data from PD 340 Flow Transmitters. Furthermore it is possible to change data and to select
various functions in the Flow Transmitters.
The displayed data could, for example, be flow or volume, or perhaps a setpoint or filter con-
stant might be selected for modification.
METER A
FLOW
BATCH
START
608149
Up to three Flow Transmitters may be selected and supervised simultaneously using the
Flowmeter-Display. The Flowmeter-Display is connected to the Flow Transmitters within a
P-NET Fieldbus system. Therefore the Flow Transmitters must have extended version elec-
tronics.
A standard configuration for a PD 340 Flow Transmitter is stored in the Flowmeter-Display
and can be transferred automatically via P-NET to a new Flow Transmitter in the system. The
standard configuration can be altered to match a specific customer configuration.
The actual configuration for each of the selected Flow Transmitters can be listed in clear text
on the display.
Please refer to the Flowmeter-Display manual (502 071) for additional information.
16/55
FLOWMETER-DISPLAY
METER B
METER C
TOTAL
TEMP
1
PRINT
SETUP
STOP
CLEAR
Prev. Page
Flow Transmitter, PD 340
7
8
9
4
5
6
2
3
0
PD 4000/340
CE
+/-
,
=
551 102 01
Manual
Advertisement
Table of Contents
