Advertisement
A T4033a
Specifications
†
ELEMENT
POLAR PATTERN
FREQUENCY RESPONSE
OPEN CIRCUIT SENSITIVITY (1 kHz)
IMPEDANCE
MAXIMUM INPUT SOUND LEVEL
NOISE, TYPICAL (A-WEIGHTED)
DYNAMIC RANGE, TYPICAL
SIGNAL-TO-NOISE RATIO, TYPICAL
HI-PASS FILTER (LOW-END ROLL- OFF)
POWER REQUIREMENTS
CURRENT CONSUMPTION, TYPICAL
WEIGHT (LESS CABLE AND CLAMP)
DIMENSIONS
ACCESSORIES FURNISHED
Polar Pattern
0
30
330
300
270
240
150
210
180
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
100 Hz
1 kHz
5 kHz
8 kHz
Frequency Response
50
100
200
500
1k
2k
Frequency in Hertz
12" or more on axis (flat)
LEGEND
Hi-pass
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
Form No. 0345-0829-00-B/W
/
SM
Fixed-charge back-plate
permanently polarized capacitor
Cardioid (Unidirectional)
30-20,000 Hz
–32 dB (25.1 mV)
100 ohms
145 dB SPL, 1 kHz at 1% T.H.D.
155 dB SPL, with 10 dB pad (nominal)
2
17 dB SPL
128 dB, 1 kHz at Max SPL
77 dB, 1 kHz at 1 Pa*
80 Hz, 12 dB /octave
48V DC phantom ( 4V)
3.2 mA
13.4 oz (380 g)
6.69" (170.0 mm) long,
2.10" (53.4 mm) maximum body diameter
AT 8441 shock mount for
threaded stands; protective carrying case
† In the interest of standards development, A.T.U.S. offers
full details on its test methods to other industry professionals
on request.
* 1 Pascal = 10 dynes/cm
1
Measured at diaphragm
2
Using Audio Precision System One
Dimensions
60
90
120
10 dB
5k
10k
20k
P51123
©1999 Audio -Technica U.S., Inc.
1
2 dB, re 1V at 1 Pa*
5
/
"-27
8
2
= 10 microbars = 94 dB SPL
2.10"
53.4 mm
6.69"
170.0 mm
0.83"
21.0 mm
0.75"
19.0 mm
Printed in U.S.A.
Optional Accessories:
• AT 8137 large cylindrical foam windscreen.
• AT 8314 2-conductor, shielded,
vinyl-jacketed, broadcast-type cable with
XLRF-type connector at microphone end,
XLRM-type connector at equipment end.
Available in 10', 20', 25', 30', 50' & 100'
lengths.
• AT 8430 stand clamp for
5
/
"-27
8
threaded stands.
• CP 8506 four-channel 48V phantom
power supply (AC powered).
• AT8801 single-channel 48V phantom
power supply (AC powered).
One -Year Limited Warranty
Audio -Technica microphones and accessories purchased
in the U.S.A. are warranted for one year from date of
purchase by Audio-Technica U.S., Inc. (A.T.U.S.) to be free
of defects in materials and workmanship. In event of such
defect, product will be repaired promptly without charge
or, at our option, replaced with a new product of equal or
superior value if delivered to A.T.U.S. or an Authorized
Service Center, prepaid, together with the sales slip or
other proof of purchase date. Prior approval from A.T.U.S.
is required for return. This warranty excludes defects
due to normal wear, abuse, shipping damage, or failure to
use product in accordance with instructions. This warranty
is void in the event of unauthorized repair or modification,
or removal or defacing of the product labeling.
For return approval and shipping information, contact
the Service Department, Audio -Technica U.S., Inc., 1221
Commerce Drive, Stow, Ohio 44224.
Except to the extent precluded by applicable state law,
A.T.U.S. will have no liability for any consequential,
incidental, or special damages; any warranty of
merchantability or fitness for particular purpose
expires when this warranty expires.
This warranty gives you specific legal rights, and you may
have other rights which vary from state to state.
Outside the U.S.A., please contact your local dealer for
warranty details.
Advertisement
