Disassembly Of Sl75 - Siemens SL75 Service Manual

Hide thumbs Also See for SL75:

Table of Contents

SL75 Level 2 Service Manual

Disassembly of SL75

ESD concept; the internal circuits will be more susceptible to ESD because of

Note:

the use of exchangeable housing. The construction of the internal block must be/is

designed, in the best possible way, to protect the circuit against sparks.

The keypad must be completely closed to prevent any occurrence of an ESD

disruptive discharge.

The SIM contacts may be open, thus reachable for ESD contact discharge. This

could lead to damage or destruction of the S-Goldlite pins.

It is a requirement for the service personnel to observe ESD protection rules while

performing servicing the SL75.

Step 1

Front view of the SL75

Step 3

COM D CCQ APAC SLI

Step 2

Remove Battery cover.

Page 15 of 44

Back View of the SL75

Siemens Technical Support Centre

Internal Use Only

Table of Contents