Scanning The Activation Periods - Viessmann Vitodens 200 Operating Instructions And User's Information Manual

Operation

Scanning the Activation Periods

14
To set the required day of the week
1. Press the "1-7" button and turn the "G" selector
knob clockwise or counter-clockwise until the arrow
"|" points to the day of the week (1 = Monday,
2 = Tuesday etc. ) for which you wish to scan the
switch-on and switch-off times.
2. Release the "1-7" button
To scan the first activation period
1. Press the red " " button under the symbol "r"
0
The switch-on time appears.
2. Press the blue "\" button under the symbol "r"
The switch-off time appears
Note: When scanning the switch on and switch off
times, note which activation period you are in.
The number of horizontal bars between the
right and left arrow indicates the corresponding
activation period (see "To scan other activation
periods").
To scan other activation periods
1. Press the red " " button and the blue "\" button
0
under the symbol "r" simultaneously.
The figure " ", ":", "3" or "-" appears for five seconds.
2. With in five seconds, turn the "G" selector knob
clockwise or counter-clockwise until the required
activation period appears.
3. To scan the switch-on and switch-off times, follow
the same procedure as for scanning the first
activation period.
The figures stand for the activation periods.
Note: Approx. three minutes after you have finished
scanning, the arrow "|" automatically jumps
to the current day of the week.
For the heating circuit with mixing valve
Scan the activation periods accordingly on timer
channel "M".
For the domestic hot water supply
Scan the activation periods accordingly on timer
channel "w".
For the DHW circulation pump
Scan the activation periods accordingly on timer
channel "p".
Vitodens 200, WB2 Operating