Table of Contents
Advertisement
These instructions assume that you have installed the driver and utility correctly, that the
adapter is inserted and in operation, and that you are within radio range of the WLAN
you want to join.
If the WLAN is set up for the easiest possible access, you can join as follows: (1) Start
the utility. (2) Go to the
about the WLAN. (4) Click
confirm that you want to connect.
This process is described in greater detail below.
Start up the Wireless Adapter Utility.
1.
The utility's
Information
utility, this panel will show that you have not joined a WLAN.
If the WLAN you want to join allows automatic detection, the utility can create a
profile containing all or most of the settings required for joining. You will need
little or no information from the WLAN operator.
If the WLAN does not allow automatic detection, you will have to obtain
configuration and security information from the WLAN operator. Then, to create
a profile and join the WLAN, go to the
information, and click
panel. (3) Double-click the line showing information
SiteSurvey
to save the profile created by the utility. (5) Click
OK
panel will appear. Ordinarily, the first time you run the
.
OK
23
panel, click
Profile
New
to
Yes
, input all the
Advertisement
Table of Contents
