Table of Contents
Advertisement
•
To reactivate the driver: Open the
open the
Add New Hardware
and press Esc.
Assuming the adapter is in the slot, the driver will be activated and the adapter will start
working. Note that the system may stop responding to keyboard and mouse actions for
about one minute.
•
To hide the driver's icon without deactivating the driver: Click the icon using the
mouse's secondary button (usually the right button) and choose
.
Icon
Figure 8. Driver icon menus (2): secondary button
•
To unhide the driver's icon: Open the
, open the
Panel
taskbar" box, and choose
The dialog box that appears when you open the
adapter-related functions provided by the operating system. Some are self-explanatory;
others are highly technical. There are two other ways to open this dialog box:
double-click the driver's icon, or
o
click the icon with the mouse's secondary button (usually the right button) and
o
choose
If you wish to remove the adapter while the computer is running, it is strongly recommended that
you first deactivate the driver as described above.
4.4 Removing the Driver
If you wish to remove the driver from the system, do so as described below. It is assumed here
that the adapter has already been removed.
1. Open the
Start
2. In the list of network components, select
3. Choose
Remove
You will be asked for confirmation and instructed to reboot the computer.
Start
(or
Add Hardware
icon, select the adapter, check the "Show control on
PC Card (PCMCIA)
.
OK
Adjust PC Card Properties
menu, go to
, choose
Settings
.
menu, go to
Settings
) icon, choose
menu, go to
Start
Settings
PC Card (PCMCIA)
.
, and open the
Control Panel
TI ACX100 WLAN Adapter
11
, choose
Control Panel
, choose
again,
Next
Next
Disable PC Card Tray
, choose
Control
icon contains
icon.
Network
.
,
Advertisement
Table of Contents
