Usb Storage Information Registration - Olympus Camedia C-7070 Repair Manual

[6] USB Storage Information Registration

USB storage data is important for when the camera is con-
nected to a computer via a USB connection.
If there are any errors in the USB storage data, or if it has
not been saved, the USB specification conditions will not be
satisfied, so always check and save the USB storage data.
Preparation:
POWER switch: ON
Adjustment method:
1. Connect the camera to a computer. (Refer to [5] Con-
necting the camera to the computer on the page C-3.)
2. Double-click on the DscCalDi.exe in the DscCalDi141.
3. Click on the Get button in the USB storage window and
check the USB storage data.
VID: OLYMPUS
PID: C7070WZ
Serial:
Rev. : 1.00
4. Check the "Serial" in the above USB storage data. If the
displayed value is different from the serial number printed
on the base of the camera, enter the number on the base
of the camera. Then click the Set button.
5. Next, check VID, PID and Rev. entries in the USB stor-
age data. If any of them are different from the values in
3. above, make the changes and then click the corre-
sponding Set button.
Calibration Upload
AWB
Firmware
Focus
Image
UV Matrix
Cal Mode
PAF Cal.
OK
VCO
EVF
Cal Data
LCD Type
OK
USB storage
Get VID Set
PID
Set
C. ADJUSTMENT METHOD
LCD
R Bright
B Bright VCOMDC
RGB Offset Gain VCOMPP
Tint Phase
H AFC Test
Setting
Language
Serial Set
Video Mode
Set Rev.
Set
Factory Code
C-4
C-7070 Wide Zoom
Ver. 1