Load Setup Defaults; Integrated Peripherals - QDI P5I430TX Titanium IB+ Manual

AWARD BIOS Description
• IRQ-3 ∼ IRQ-15
assigned to
• DMA-0 ∼ DMA-7
assigned to
• PCI IDE IRQ Map
To
• Primary IDE INT#
• Secondary IDE INT#
• Used MEM Base
Addr/Used MEM Length

3.8 Load Setup Defaults

The Setup Default settings are common and efficient.

3.9 Integrated Peripherals

IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
3 -
10
Disabled
Legacy ISA
PCI/ISA PnP
Legacy ISA
PCI/ISA PnP
PCI-AUTO
PCI - SLOT 1~4
ISA
A ∼ D
A ∼ D
C800/8 ∼ 64K
N/A
ROM PCI/ISA BIOS (2A59IQ1G)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
Disable forces updating
function.
The specified IRQ-x will be assigned
to ISA only.
The specified IRQ-x will be assigned
to ISA or PCI.
The specified DMA-x will be assigned
to ISA only.
The specified DMA-x will be assigned
to ISA or PCI.
BIOS will scan for PCI IDE devices
and determine the location of the PCI
IDE device.
BIOS will scan IRQ14 for primary IDE
INT# and IRQ15 for secondary IDE
INT# at the specified slot.
BIOS will not assign any IRQs even if
PCI IDE card is found, because some
IDE cards connect the IRQ14&15
directly from ISA slot through a card.
Indicates which INT# the PCI IDE card
uses for its interrupting 1st IDE channel.
Indicates which INT# the PCI IDE card
uses for its interrupting 2nd IDE channel.
Claims a memory space occupied by
legacy ISA card.
Invalidates this feature.
ECP mode use DMA
ESCD
: 1