QDI P5I430TX Titanium IB+ Manual page 41

Throttle Duty Cycle
VGA Active Monitor
Soft-Off by PWR-BTTN : Instant-Off
Resume by Ring
Resume by Alarm
** Wake up Events Form Suspend **
IRQ8 Break Suspend
The following indicates the options of each item and describe their meaning.
Item Option
• Power
Disabled
Management User Define
Min Saving
Max Saving
• PM Control
No
by APM Yes
• Video Off
Blank
Method Screen
V / H SYNC
+ Blank
DPMS
• Video Off
N/A
After
Suspend
Standby
Doze
• Doze mode
Disabled
1Min ∼ 1 Hr
• Standby
Disabled
1 Min ∼ 1Hr
Mode
• Suspend
Disabled
1 Min ∼ 1Hr
Mode
: 62.5%
Thermal Duty Cycle
: Disabled CPU Warning Temperature
: Disabled
: Disabled
ESC: Quit
F1 : Help
F5 : Old Values (Shift)F2: Color
: Disabled F7 : Load Setup Defaults
Figure-5 Power Management Setup Menu
Global Power Management (PM) will be disabled.
Users can configure their own Power Management Timer.
Pre - defined timer values are used so that all timers
are in their MAX values.
Pre - defined timer values are used so that all timers
are in their MIN values.
System BIOS will ignore APM when Power Management is
enabled.
System BIOS will wait for APM's prompt before it
enters any PM mode e.g. Standby or Suspend.
The system BIOS will only blank off the screen when
disabling video.
In addition to Blank Screen, BIOS will also turn off the V-
SYNC & H - SYNC signals from VGA cards to monitor.
This function is enabled only for the VGA card
supporting DPMS.
System BIOS will never turn off the screen.
Screen off when system is in Suspend mode.
Screen off when system is in Standby mode.
Screen off when system is in Doze mode.
The system will never enter Doze mode.
Defines the continuous idle time before the system
enters Doze mode. If any item defined in "Wake Up
Events In Doze & Suspend" is On and activated, the
system will be waken up.
The system will never enter Standby mode.
Defines the continuous idle time before the system enters
Standby mode. If any item defined in "Wake Up Events In
Doze & Suspend" is On and activated, the system will be
waken up.
The system will never enter Suspend mode.
Defines the continuous idle time before the system enters
Chapter 3
: Disabled
: Auto
↑↓→← : Select Item
PU/PD/+/- : Modify
Description
3 - 9