Feature Settings - Prestan AED UltraTrainer Instructions Manual

CPR
Metronome
On
CPR
Metronome
Off
COPYRIGHT© 2020 PRESTAN PRODUCTS, LLC

FEATURE SETTINGS

Ventilations On
1. Program begins with analyzing
patient and advising shock or no
shock based on user scenario
setting.
2. Audible prompt "BEGIN CPR" starts
compression cycle.
3. Metronome beats and audible
prompt notes "TEN", TWENTY, and
THIRTY compression counts.
4. After 30 compression beats, the
metronome pauses for an audible
prompt to "GIVE 2 BREATHS".
5. Compressions beats and breaths
continue for 5 cycles (2 minutes).
6. Unit analyzes patient.
7. Cycles repeat indefinitely following
scenario shock pattern until unit is
manually shut off.
1.
Program begins with analyzing
patient and advising shock or no
shock based on user scenario
setting.
2.
Audible prompt "BEGIN CPR" starts
compression cycle.
3.
Audible prompt notes "TEN",
TWENTY, and THIRTY compression
counts.
4.
After time for 30 compressions, the
metronome pauses for an audible
prompt to "GIVE 2 BREATHS".
5.
Compressions beats and breaths
continue for 5 cycles (2 minutes).
6.
Unit analyzes patient.
7.
Cycles repeat indefinitely following
scenario shock pattern until unit is
manually shut off.
1. Program begins with analyzing
2. Audible prompt "BEGIN CPR"
3. Compression beats with audible
4. Compression beats continue for
5. Unit analyzes patient.
6. Cycles repeat indefinitely
1.
2.
3.
4.
5.
6.
7
Ventilations Off
patient and advising shock or no
shock based on user scenario
setting.
starts compression cycle.
prompt to "CONTINUE CPR"
every 24 seconds (x4).
2 minutes.
following scenario shock pattern
until unit is manually shut off.
Program begins with analyzing
patient and advising shock or no
shock based on user scenario
setting.
Audible prompt "BEGIN CPR"
starts compression cycle.
Silence except for audible
prompt to "CONTINUE CPR"
every 24 seconds (x4).
Cycle stops at 2 minutes.
Unit analyzes patient.
Cycles repeat indefinitely
following scenario shock pattern
until unit is manually shut off.