Projector Status Display Messages - Epson EB-PU2010B User Manual

Projector Status Display Messages

You can monitor the projector's status and view error information in the
projector's Info menu.
Info > Status Information
s
Categories on the status display let you view information about the projector
and its operation.
• Status messages are available only in English.
• Items displayed vary depending on your projector model, the image
a
signal, and the image source.
Status Information category
Information Description
System See the System status information table.
Source Displays the source currently being used.
On-ScreenDisplay Displays the settings for on-screen displays. When turned
off, menus or messages are not displayed on the projected
images.
A/V Mute Displays the A/V Mute status.
Intake Air Temp Displays the air intake temperature.
Internal Temp Lv Displays the projector's internal temperature.
AC Voltage Monitors the status of the input voltage, and displays a
warning or an error when a momentary voltage drop
occurs. Warnings and errors indicate the following status:
• Warning1: voltage drop
• Warning2: instantaneous interruption
• Error: power blockade
When you turn off the projector by shutting off the power
outlet (direct shutdown), an error is displayed. This is not
an actual error.
ExtCam Status Displays the operation status of the optional external
camera.
Laser Status Displays the operating status of the light source.
Source category
Information Description
Source Displays the source currently being used.
Resolution Displays the resolution of the current input signal.
Color Space Displays the color space of the current input signal.
H-Frequency Displays the horizontal frequency of the current input
signal.
V-Frequency Displays the vertical frequency of the current input signal.
Sync Polarity Displays the sync polarity.
Sync Mode Displays the sync type.
Detected Mode Displays the detected mode of the current input signal.
Video Range Displays the video level of the projector.
Transport Displays the scanning method.
Signal Information category
Information Description
5V Detect Displays the detection results of 5V signals.
TMDS Clock Displays the TMDS frequency of the current input signal.
H-Frequency Displays the horizontal frequency of the current input
signal.
V-Frequency Displays the vertical frequency of the current input signal.
Stable Time Displays the amount of operating time since the input
source was determined.
HDCP Status Displays the HDCP status.
HDCP Ver Displays the HDCP version.
AVI VIC Displays the VIC information (AVI) of the current input
signal.
AVI Checksum Displays the checksum result for AVI.
AVI Sampling Str Displays color sampling for AVI.
153