Epson EB-PU2010B User Manual page 151

Hide thumbs Also See for EB-PU2010B:
Table of Contents

Advertisement

Projector Indicator Status
Indicator and status
Problem and solutions
Power: Flashing blue
Preparing to enter USB Power in Standby mode.
Status: Off
Laser: Off
Temp: Off
Filter: Off
Power: Lit blue
A/V Mute is in progress.
Status: Lit blue
Laser: Flashing blue
Temp: Off
Filter: Off
Power: Indicator status
Refresh Mode is in progress.
varies
s Reset > Refresh Mode
Status: Flashing blue
Laser: Flashing orange
Temp: Indicator status
varies
Filter: Indicator status
varies
Power: Flashing blue
Projector is too hot.
Status: Indicator status
• Make sure that the vents and air filter are not clogged
varies
with dust or obstructed by nearby objects.
Laser: Indicator status
• Clean or replace the air filter.
varies
• Make sure the environmental temperature is not too
Temp: Flashing orange
hot.
Filter: Indicator status
varies
Indicator and status
Problem and solutions
Power: Off
Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
Status: Flashing blue
• Make sure that the vents and air filter are not clogged
Laser: Off
with dust or obstructed by nearby objects.
Temp: Lit orange
• Make sure the environmental temperature is not too
Filter: Off
hot.
• Clean or replace the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's menu.
s Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and
contact Epson for help.
Power: Flashing blue
Laser warning.
Status: Indicator status
Turn the projector off, unplug it, and contact Epson for
varies
help.
Laser: Flashing orange
Temp: Indicator status
varies
Filter: Indicator status
varies
Power: Flashing blue
Lens warning.
Status: Indicator status
An unsupported lens is attached; remove the
varies
unsupported lens and attach a lens that is supported.
Laser: Flashing orange
Temp: Indicator status
varies
Filter: Indicator status
varies
Power: Off
Laser or retardation plate has a problem.
Status: Flashing blue
Turn the projector off, unplug it, and contact Epson for
help.
Laser: Lit orange
Temp: Off
Filter: Off
151

Advertisement

Table of Contents
loading

Table of Contents