Stopping The Usric-4; Automatically; Manually; Accessing The Stored Data - LogTag Recorders USRIC-4 Product User Manual

Stopping the USRIC-4

Automatically

The USRIC-4 automatically stops recording temperature when the
maximum number of readings specified during configuration has been
reached. Your unit can also be set up to stop when it is inserted into a
USB socket. This option needs to be set up at the factory and cannot
be changed during configuration with LogTag
distributor can supply more information about this option.

Manually

The USRIC-4 cannot be stopped manually on the device. You can,
however, use the Hibernate function from LogTag
LogTag menu to stop the recording.

Accessing the stored Data

To acces the recorded data you will require LogTag
software. If you have started LogTag
USRIC-4 into one of the computer's USB ports, the data will be
automatically downloaded, and stored in a file in the folder you have
chosen during installation of the software.
The data on the unit is retained, and each time you plug the
USRIC-4 back into the computer the files are re-generated, albeit
with a new file name. Once the battery is exhausted, however,
the real time clock on the unit stops and dates and times may no
longer be accurate.

Unplugging

You can unplug a USRIC-4 at any time; there is no need to stop the
device via the shortcut menu in the notification area on the taskbar. If
you plug a unit into a USB port during a start delay, the delay period
will re-start when the unit is unplugged. You will see the start and
delay signals indicated by the LED's. The delay will also be restarted
if you press the
START/Mark
You may see the start signal if you have configured a time start, but
have left the unit plugged in beyond the start time of the USRIC-4.
Page 6 of 9
®
Analyzer. Your
®
Analyzer's
®
Analyzer
®
Analyzer before you plug the
button during the delay period.
USRIC-4 Product User Guide, Revision 1.0, copyright © 2004-2016,
®
LogTag Recorders . All rights reserved.