Channel Reset; Factory Reset - Heatmiser SP OpenTherm neoHub Mini OT Manual

Warning - This reset will remove any thermostats that have paired
and will also reset the WiFi connection settings. You will have to
reconfigure these after resetting.
To reset all settings stored in the neoHub Mini;
Press and hold the Power/Pairing button for 15 seconds.
The CH1 CH2 lights will start flashing.
nce the lights have stopped flashing, the ub will the
power light
Now pair your thermostats to the ub and reconfigure the WiFi
settings as explained earlier in the manual.
neoHub Mini